User’s manual NAVIGON 84xx NAVIGON Live Services English (United Kingdom) December 2009
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification.
User’s manual NAVIGON 8410 Table of contents 1 Introduction .......................................................................................7 1.1 About this manual ...................................................................................7 1.1.1 1.1.2 1.2 Legal notice.............................................................................................7 1.2.1 1.2.2 1.3 2 Questions about the product ...................................................................8 2.
User’s manual NAVIGON 8410 6 7 Voice Command..............................................................................24 6.1 Activating the voice commands function ...............................................24 6.2 Use Voice Command ............................................................................25 6.3 Help.......................................................................................................25 6.4 Deactivation of the voice commands function......................
User’s manual NAVIGON 8410 9.4.3 9.4.4 9.4.5 9.4.6 9.5 Map in Destination search mode...........................................................64 9.5.1 10 Navigation in Track mode .......................................................63 Navigation in Offroad mode ....................................................63 Map options in Navigation mode.............................................64 Quitting navigation ..................................................................
User’s manual NAVIGON 8410 11.5.3 11.5.4 Selecting a play-back list ........................................................86 Editing a play-back list ............................................................86 11.6 Configuring the Media Player................................................................87 12 Handsfree Module...........................................................................88 12.1 Connection with Mobile Phone..............................................................
User’s manual NAVIGON 8410 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Names of products SMALL CAPITALS: Names of windows and dialogue boxes Bold: Highlighting of important parts in the text Underlined: Descriptions of buttons, input boxes and other elements on the user interface Underlined and italics: Names of control elements on the navigation device 1.1.
User’s manual NAVIGON 8410 proprietary rights of their respective owners. All trade marks, trade names and company names used in this document are or may be trade marks or registered trademarks of their respective owners. All rights reserved except those explicitly granted. The absence of the explicit labelling of registered trademarks used in this manual does not imply that the brand is not subject to the rights of a third party. ► ► 1.
User’s manual NAVIGON 8410 2.2 Description of the NAVIGON 8410 1 2 Touch-screen Mini USB-OTG socket for connecting the DVB-T module, which is available as an accessory, or a USB stick 3 Microphone 4 Mini USB socket for USB cable / mains adapter 5 Stereo headset socket 6 Reset 7 LED 8 Slot for microSD memory card 9 Connection for external GPS antenna 10 On/Off 2.3 NAVIGON Suite NAVIGON Suite is an application for your PC or Mac with many useful functions.
User’s manual NAVIGON 8410 ► Install additional software designed to make it even easier for you to use your navigation system: ► ► NAVIGON Fresh for keeping your navigation system up to date at all times and for using additional services NAVIGON Sync for transferring contact addresses from Microsoft Outlook to your navigation system How to install NAVIGON Suite: 1. Connect the navigation device to your computer with a USB cable. 2. Open the file manager on your PC or Mac (e.g.
User’s manual NAVIGON 8410 Note: If you have not understood the spoken instructions or are unsure about what to do at the next junction, you can refer briefly to the map or schematic view of your navigation system. 2.4.2 Safety information for the navigation device Caution! Protect the device from moisture. The device is neither waterproof nor protected against splash water. Caution! The surface of the display is made of glass. It can break if the device is dropped.
User’s manual NAVIGON 8410 Caution! Do not attach the cradle within the working zone of any airbags. Caution! Do not fasten the cradle too close to the steering wheel or other controls. The driver must not be obstructed in operating any car functions. Caution! When installing the cradle, make sure that it will not pose a risk in the event of an accident. Caution! Do not run cables directly next to safety-relevant devices and power supplies.
User’s manual NAVIGON 8410 Note: Plug the USB connector into the navigation device as far it will go! (Refer to "Troubleshooting" on page 107) During charging, the LED on the bottom of the NAVIGON 8410 shines with an orange light. As soon as the battery is fully charged, the LED lights up green. 2.5.3 Installing the navigation system in the vehicle Caution! Be sure to refer to all the safety information in chapter "Important safety information" on page 10. Securing the cradle 1.
User’s manual NAVIGON 8410 Adjusting the cradle On the back of the cradle is an adjusting screw which can be used to adjust the cradle. To make adjustments you need a matching Allen key (2.5 mm). ► Make the adjustments in steps, i.e. turn the screw in or out by no more than a quarter of a turn and test the effect.
User’s manual NAVIGON 8410 Inserting the navigation device into the cradle On the back of the NAVIGON 8410 you will see a circle with two recesses. 1. Hang the navigation device by the upper recess on the upper lug of the cradle. (See illustration) 2. Then press it towards the cradle so that it latches in place. Removing the navigation device from the cradle On the bottom of the plate in which you hung the navigation device is a clip. 1.
User’s manual NAVIGON 8410 then insert in the device. The NAVIGON 8410 can use navigation maps from both memories. Note: Comfort functions such as Real City 3D are not available without the data on the supplied memory card. If you insert a different memory card in the navigation device, make sure that it also contains these data. 2.6 Navigation with GPS GPS is based on a total of at least 24 satellites orbiting the Earth and continuously transmitting signals of their position and time.
User’s manual NAVIGON 8410 ► TV (deactivated when the DVB-T module is not connected) Note: The TV software and the DVB-T module are not included in the delivery of your NAVIGON 8410. You can purchase the DVB-T package in our online shop at www.navigon.com. ► Media Player, refer to page 82 ► Phone, see page 88 Note: If you have not used the NAVIGON 8410 for a long time, the battery may be flat.
User’s manual NAVIGON 8410 Switching off the navigation device ► Press the (On/Off) key and keep it pressed until the message "Let go of the key to switch off the device." appears. (Approx. 6 seconds) Note: When you switch the navigation device to standby mode, the next time it is switched on it will start very quickly and with the window which was active when switched off. In standby mode the device still consumes a small amount of energy however. The battery may be flat within a few days.
User’s manual NAVIGON 8410 The ENTER PASSWORD window opens. 2. Enter the currently valid password in the Enter password box. 3. Tap on Change password. The NEW PASSWORD window opens. 4. Enter a password in the New password box and tap on Next. 5. Enter this password again in the Confirm new password box. 6. Tap on Activate. Note: The new password must have exactly 4 digits. 4.3 Cancelling password protection 1. In the NAVIGATION window tap on Options > Settings > Options > Password Lock.
User’s manual NAVIGON 8410 GPS Ready: Data is being received from at least 3 satellites. The position can be calculated. For details of the GPS status refer to chapter "GPS Status, saving the current location" on page 75. Compass The Compass symbol indicates in which direction you are currently heading. It can indicate the following points of the compass: N, NE, E, SE, S, SW, W, NW. Track The (Record Track) symbol indicates that a track is being recorded at this moment.
User’s manual NAVIGON 8410 For details of the TMC function refer to chapter "TMC (Traffic Information)" on page 77. Energy The Energy symbol can indicate the following states of the integrated battery: The device is being supplied by an external power source. The battery is fully charged. - or The battery cannot be charged because its temperature is too high or too low. The device is being supplied by an external power source. The battery is being charged.
User’s manual NAVIGON 8410 Muting The Muting symbol can indicate the following states: No symbol: The navigation application is not muted. Muting: The navigation application is muted. If the device is navigating at the moment, you will not hear any driving instructions. Note: This icon indicates only the muted state of the navigation instructions. It says nothing about the volume of the hands-free module. 5.2 Software keyboard A software keyboard appears on the screen when text entries are necessary.
User’s manual NAVIGON 8410 Example: The language of the user interface is English. You want to navigate to Moscow. You have the following options: ► "Москва" (Cyrillic) ► "Moskva" (transliterated) ► "Moscow" (English). Note: Street names and place names can be entered only in the language of the user interface if that is how they exist in the map's database. Note: The maximum number of keyboards is always 2.
User’s manual NAVIGON 8410 The list closes once an entry has been selected. You are now finished with entering the city. ► Tap on an entry. (Close List) in order to close the list without selecting Note: The list opens automatically as soon as it contains only 4 or less entries. 5.3 Options Some windows offer options that lead to more functions. A description of all available options can be found in the chapter "Options" on page 50. 5.4 Menus Some buttons have menus which open when activated.
User’s manual NAVIGON 8410 6.2 Use Voice Command When the functions in a window can be called up by voice command, this is indicated in the top left corner of the window by the symbol (Voice command active). (Speak) indicate that the A single signal tone and the symbol navigation system is waiting for your voice command. ► Say a command. The positive acknowledgement tone sounds (two high-pitch tones) and the function is executed.
User’s manual NAVIGON 8410 ► ► Answering: You can enter addresses and answer questions asked by the navigation device. Entering Addresses: You can enter only addresses with the voice command function. Note: For details of how to enter the destination address using voice commands refer to the chapter "Entering a destination by voice commands" on page 32. The volume of the voice commands assistant can be controlled independently of the volume of the navigation instructions.
User’s manual NAVIGON 8410 When you start the navigation application for the first time, the DEMO MODE settings window opens. Demo mode is intended only for demonstrating the product when no GPS reception is possible. When demo mode is active, navigation is not possible! Demo mode is designed solely to simulate navigation to the centre of the indicated destination. ► Make sure that the Start in Demo Mode setting is at No.
User’s manual NAVIGON 8410 Initialising the GPS receiver Note: Good reception of GPS data requires an unobstructed path from the GPS receiver to the satellites. Tunnels, narrow thoroughfares between buildings and reflecting house fronts can restrict GPS reception greatly or make it impossible. If the GPS receiver or the navigation device is inside a vehicle, a metallised windscreen or a windscreen heater can be the cause of poor GPS reception.
User’s manual NAVIGON 8410 7.2 Specifying a destination Under New Destination you can enter destinations to which you have not yet navigated or which you have not saved. Here you can enter the destination's address or coordinates, select a POI, or select a destination with the Direct Access function. Note: The first time that you want to enter a new destination you will be asked to select the country in which your destination is situated.
User’s manual NAVIGON 8410 Note: The following description is based on City First as the order for entering the address. If the navigation device contains the map of a country in which the street is usually listed first (e.g. Sweden, Norway, ...), you can also choose Street First as the order for entering the destination address. You can define the order in the NAVIGATION window at Options > Settings > General > Input Mode for Address Data.
User’s manual NAVIGON 8410 Note: It is not necessary to enter all the address details. You can tap on Start Navigation before you get that far. If you specify the town only, the navigation system will calculate a route to the town centre. If you specify only the town and street without specifying a house number or cross street, the navigation system will calculate the best route to this street. 7.2.3 Enter Coordinates You can also enter the geographic coordinates of your destination.
User’s manual NAVIGON 8410 ► Tap on the button if you want to change the current setting. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate MyRoutes in order to change the setting. 5. Tap on Start Navigation in order to navigate to the stipulated address - or Tap on Parking in order to search for and navigate to a car park near your destination.
User’s manual NAVIGON 8410 Entering a POI nearby 2. Say "POI Nearby". 3. Say which category of POI you want (e.g. "Hotel"). A list of nearby hotels opens. 4. Say the number of the hotel to which you want to navigate. Say "Up" or "Down" in order to scroll in the list. When you have selected a destination, the map opens in Preview mode. The destination is indicated on the map. Entering a Favourite or an address from the phone book 2. Say "My Destinations". 3. A list opens.
User’s manual NAVIGON 8410 Note: GPS reception must be good enough for determining your (GPS Ready) symbol to see whether GPS position. Check the reception is good enough. For more details refer to the chapter "Initialising the GPS receiver" on page 28. Note: The direct access function offers 3 categories of nearby POIs which can be searched for quickly and without additional entry. For more details refer to the chapter "Direct access to POIs" on page 37. 1.
User’s manual NAVIGON 8410 The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 42. Please read on there. POIs of nationwide significance POIs of nationwide significance are airports, sights, national monuments, large ports etc. This way you can find well-known places of interest even if you don't know the name of their location. 1.
User’s manual NAVIGON 8410 POIs in a particular location POIs in a particular location can be useful when navigating in an unfamiliar town. 1. In the NAVIGATION window tap on New Destination > Search for POI > in a City. The POI IN A CITY window opens. 2. Enter the name or the postal code of the destination town. 3. Select a category from which you would like to find a POI. Categories in which no destinations are available in the selected town cannot be entered.
User’s manual NAVIGON 8410 The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to chapter "Route preview" on page 42. Please read on there. Direct access to POIs The direct access area contains 3 categories of POI. Destinations in your vicinity that correspond to one of these categories can be viewed here quickly and without further entry.
User’s manual NAVIGON 8410 There is, for example, a telephone number available for many restaurants. You can then call the restaurant to reserve a table, for example. One of the destination entry windows described above is open. ► Tap on Options > Info. The DESTINATION INFO window opens. It contains all the information about the specified destination that is stored in the navigation system's database. ► ► ► Tap on Cancel in order to close the DESTINATION INFO window again. Tap on map.
User’s manual NAVIGON 8410 For detailed information on how to start navigation, please refer to chapter "Route preview" on page 42. Please read on there. Note: Favourites are indicated on the map by a small flag with their name. 7.2.8 Last Destinations NAVIGON 8410 saves the last 12 destinations to which you have navigated in the LAST DESTINATIONS list. 1. In the NAVIGATION window tap on My Destinations > Last Destinations. 2. Tap on the destination to which you want to navigate.
User’s manual NAVIGON 8410 1. in the NAVIGATION window tap on My Destinations > Imported Addresses > Outlook / Internet. 2. Tap on the address to which you want to navigate. The DETAILED INFORMATION ABOUT THE DESTINATION window opens. Indicated on the Activate MyRoutes button is whether several route suggestions are to be calculated (Yes) or not (No). ► Tap on Activate MyRoutes in order to change the setting. 3. Tap on Start Navigation.
User’s manual NAVIGON 8410 7.2.11 Navigating home In NAVIGON 8410 you can save an address as your home address. You can navigate to your home address at any time by pressing a single button. More information about entering your home address can be found in the chapter "Defining the home address" on page 44. ► In the NAVIGATION window tap on Take Me Home. If you have not yet entered your home address, a dialog box will notify you of this. Navigation starts.
User’s manual NAVIGON 8410 For detailed information on how to start navigation, please refer to chapter "Route preview" on page 42. Please read on there. 7.2.13 Route preview The map is open in Preview mode. The navigation destination is depicted by a small flag. For detailed information refer to the chapter "Map in Preview mode" on page 54. Route Profile The route is calculated on the basis of a route profile. The current route profile is indicated at the top right edge of the map.
User’s manual NAVIGON 8410 When calculating the time of arrival or the trip time, the navigation system takes account of additional factors such as day of the week, time of day or traffic messages. The route which corresponds best to the selected route profile is marked with "MyRoute". Note: Even when the MyRoutes function is activated, sometimes only one additional route or no additional routes at all can be calculated for a particular route. No further suggestion is then shown on the button in question.
User’s manual NAVIGON 8410 FAVOURITES list. This makes sense if you frequently navigate to this particular destination. Note: Favourites are indicated on the map by a small flag with their name. 7.3.1 Saving destinations 1. Enter a destination. (Refer to "Entering a destination address " on page 29 or "Points of interest" on page 33). Do not tap on the Start Navigation button! 2. Tap on Options > Save Destination - or 1.
User’s manual NAVIGON 8410 The selected destination has now been saved as your home address. Your home address now appears in the FAVOURITES list marked by a house symbol. Note: The home address is also indicated on the map by a house symbol. Changing the home address You can define a different address as the home address at any time. Proceed as described above. 7.4 Multi-leg routes or tracks It is possible to plan routes without GPS reception, for example in the comfort of your home.
User’s manual NAVIGON 8410 3. Enter the starting point. (Refer to the corresponding section of the chapter "Specifying a destination" on page 29). 4. Tap on Set Starting Point. The selected starting point will now be displayed next to the 0 button (Starting Point). Changing the starting point ► Tap on the starting point (button 0). The STARTING POINT menu opens. You can now enter a different starting point. Proceed as described above. 7.4.
User’s manual NAVIGON 8410 Delete: Deletes the selected route point. A dialog window prompts you to confirm deletion. 7.4.4 Managing routes You can save each planned route under a particular name. Note: Only the start point and route points will be saved, not the calculated route. When you load a saved route, it must be recalculated before navigation can start. You can load, rename or delete stored routes. Saving routes The ROUTES AND TRACKS window is open.
User’s manual NAVIGON 8410 For details about navigating along recorded tracks refer to chapter "Navigation in Track mode" on page 63. 7.4.6 Calculating and displaying routes It is possible to calculate and display a planned route on the map even without GPS reception in order to get an impression of the journey. The ROUTES AND TRACKS window is open. The starting point and at least one route point have been entered. ► Tap on Show Route. The map opens in Preview mode.
User’s manual NAVIGON 8410 Route Profile Route profiles take account of the characteristics and special aspects of the different modes of transport. For example a route profile for bicycles will exclude motorways from the route calculation but will include roads which other vehicles are not allowed to use. And a bicycle profile will calculate different arrival times than a motorcycle profile. Note: If you select a pedestrian profile, a type of navigation specially developed for pedestrians will be started.
User’s manual NAVIGON 8410 Note: Even when the MyRoutes function is activated, sometimes only one additional route or no additional routes at all can be calculated for a particular route. No further suggestion is then shown on the button in question. Start Navigation ► Tap on the button of the route which you want to use for the navigation. If you select a route for which traffic obstructions have been announced, the PREVIEW TMC window may open before navigation starts.
User’s manual NAVIGON 8410 Start Recording, Stop Recording: Starts or ends the recording of a track. (Refer to "Tracks" on page 70) Factory Settings: Resets all settings to the as-delivered state. Routes and saved destinations are deleted. The software is re-started and behaves as if started for the first time after being purchased (refer to "Switching on the NAVIGON 8410" on page 16). Settings: Opens the SETTINGS window. Here you can configure the navigation system.
User’s manual NAVIGON 8410 Direct Help: Opens a window in which you can find in quick and uncomplicated manner the addresses and phone numbers of offices in your direct vicinity that can be useful in emergencies. (Refer to "Direct Help" on page 74). If the navigation device is connected to a mobile phone, you can initiate a call here directly. Parking: Starts navigation to a car park near the destination. Password Lock: Opens a window in which the password can be configured.
User’s manual NAVIGON 8410 Rename: Opens a window in which you can change the name for the selected destination or route. Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are listed. (Refer to "TMC (Traffic Information)" on page 77) Turn-by-Turn List: Shows detailed directions for the route, including all points at which you must turn. (Refer to "Turn-by-Turn List" on page 76) Save Destination: Saves the selected address in the FAVOURITES list.
User’s manual NAVIGON 8410 To open the map: ► In the NAVIGATION window, tap on Options > Show Map. Note: If the voice commands function is not available for the language of the user interface, the Show Map button will be directly in the NAVIGATION window. Note: If GPS reception is not good enough to establish your location, the map will be opened in Destination search mode.
User’s manual NAVIGON 8410 You have planned or loaded a route and tapped on Show Route. The map opens in Preview mode. 1 When the MyRoutes function is activated, up to three numbered routes are indicated on the map in different colours (orange, green, blue). In the following cases only one route is shown: 2 ► The MyRoutes function is deactivated. ► You have planned a route with more than one route point. ► A route profile with the Pedestrian speed profile is active. ► The route includes a track.
User’s manual NAVIGON 8410 As soon as you tap on a button, navigation along the route in question will start. 5 The destination is marked with a little flag. If you display a planned or loaded route, the starting point and each route point will be marked with a little flag. In the case of a multi-leg route, the distance and the estimated driving time for each leg are displayed. ► ► Tap on the (Route Profile) button (refer to the figure, point 3) in order to select a different route profile.
User’s manual NAVIGON 8410 1 Here is shown what signposts should be followed. 2 Here you can see any speed limits, warning signs or prohibiting signs (refer also to "Warn from bends" on page 73). 3 The route is highlighted in orange. 4 When two manoeuvres need to be executed in quick succession, the small arrow box indicates the second manoeuvre to be executed. 5 The large arrow box shows a diagram of the next junction which you should turn on to.
User’s manual NAVIGON 8410 If no distance is indicated, all the obstructions which are reported for your route and would lead to a loss of time will be avoided. ► Tap on the Traffic Information box in order to open the TRAFFIC INFORMATION window. (Refer to "Displaying traffic messages" on page 78) Note: The calculation of detour routes to avoid reported traffic obstructions can be performed automatically.
User’s manual NAVIGON 8410 Note: The displays of many of the above mentioned areas can be configured in Options > Settings > Navigation. Some displays will only function if the required information is available on the map. Note: If you tap on the large arrow box, the current route instruction will be repeated. Note: If you leave the road system covered by the map, the navigation will switch to Offroad mode.
User’s manual NAVIGON 8410 Navigation in Real City 3D mode takes place in similar manner to navigation in Vehicle mode. The main difference is that the lane which you are to follow is not indicated in a small symbol at the right-hand edge of the screen. Instead the route shown leads directly via the correct lanes (the right-hand lane in the figure). Note: The number of cities for which Real City 3D is available is growing all the time.
User’s manual NAVIGON 8410 The Reality View mode shows with greater clarity the signposting and lanes you must follow. This display does not change until you have passed the spot indicated. The map will then change back to Navigation mode. ► If you want to change to Navigation mode before then, just tap on any point on the map. Note: The Reality View mode is not available for all motorway junctions and three-leg motorway junctions. Availability depends on the map material used. 9.4.
User’s manual NAVIGON 8410 1 The beeline to the destination is marked in red. 2 The direction in which your destination lies is indicated (red triangle). 3 The current position is indicated (orange arrow). You can see in which direction you are moving. 4 The part of the route which you have already covered is marked in green. 5 The route which was calculated using the digitalised road system is marked in orange. 6 In this box you are shown the distance remaining to the destination (beeline).
User’s manual NAVIGON 8410 The map section shown does not follow you when you move. You can "wander" off the map. Recalculate route: Recalculates the route. Use this function if you have wandered far from the calculated route and would like a new route proposal. 9.4.3 Navigation in Track mode This mode becomes active if you have planned a route with a track for the navigation. (Refer to "Multi-leg routes or tracks" on page 45) After the route was shown in Preview mode, navigation was started.
User’s manual NAVIGON 8410 ► During navigation in Vehicle mode you leave the digitalised road system. The navigation then guides you in Offroad mode to the nearest point on the digitalised road system. If necessary the route will be recalculated. Once you reach any point on the digitalised road system, the navigation will be continued in Vehicle mode. (Refer to "Navigation in Vehicle mode" on page 56) ► You have specified a destination that lies off the digitalised road system.
User’s manual NAVIGON 8410 Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom In: The map section becomes smaller, but you will see more details. Zoom Mode: When this button is active you can mark out a section of the map with your finger. Mark out the section from upper left to bottom right to zoom in until the section fills the screen. Mark out the map section from bottom right to top left to zoom out.
User’s manual NAVIGON 8410 2. Tap on (OK). Buttons with various functions will be displayed. Take Me There: Starts navigation to the selected point. If you are currently navigating, this route navigation will be cancelled. MyReport: Opens the MYREPORT window. Here you can notify NAVIGON about any changes to traffic monitoring systems and routing. Interim Destination: Sets the selected point as interim destination. The navigation system will first guide you to this interim destination.
User’s manual NAVIGON 8410 ► ► ► Consider Traffic Information: defines whether traffic messages are to be considered when calculating the route Motorways, Ferries, Restricted Areas: defines whether these types of road are allowed to be used Use of toll roads: defines whether toll roads are allowed to be used when calculating the route ► Tap on the (Edit) button. The USE OF TOLL ROADS window opens. ► Adapt the individual settings to your requirements (Yes, No, Ask before).
User’s manual NAVIGON 8410 1. Tap on Options > Settings. If the map is open in Standard mode, tap on Options > General > Settings. (Current Route Profile) button. This button can also 2. Tap on the show a different symbol. 3. Tap on the name of the route profile which you want to take as basis for the new profile. 4. Tap on Options > Copy. 5. Enter a name for the route profile. 6. Tap on Save. 7. Adapt the route profile to your requirements. 8. Tap on OK.
User’s manual NAVIGON 8410 1. Tap on the (Edit) button alongside the Use of toll roads setting. The USE OF TOLL ROADS window opens. 2. Adapt the individual settings to your requirements (Yes, No, Ask before). If you activate the Ask before setting, each time the route preview wants to calculate a route with a toll road you will be asked whether you want to use the type of toll roads in question. You can then lay down this setting for future journeys as well. Renaming a route profile 1.
User’s manual NAVIGON 8410 10.2 Screenshots You can create and save screenshots of the content currently shown on the screen at any moment. 10.2.1 Enabling screenshots 1. In the NAVIGATION window tap on Options > General > Enable Screenshots. 2. Select whether you want to enable screenshots (Yes) or not (No). (Screenshots) button appears at the bottom right edge of The the screen. 10.2.2 Creating a screenshot ► Tap on the (Screenshots) button. The screen is saved as a graphic.
User’s manual NAVIGON 8410 The (Record Track) symbol appears at the top right edge of the screen throughout the recording. The recorded route is saved in the SAVED ROUTES AND TRACKS list in KML data format. It can be loaded again from there at any time. Stopping the recording ► Tap on Options > Services > Stop Recording. The recording is stopped. The recorded route is saved in the SAVED ROUTES AND TRACKS list in KML data format. It can be loaded again from there at any time.
User’s manual NAVIGON 8410 The following message appears: "Your current position has been saved. You will find it in the 'Favourites' list as 'My Vehicle'. This enables you to easily find the way back to your vehicle." 3. Tap on OK. The position of your vehicle is marked on the map by an asterisk in orange. The navigation continues to guide you to the destination in Pedestrian mode. Searching for a car park You want to be guided to a car park near the destination.
User’s manual NAVIGON 8410 10.5 Nearby During the navigation, or after having opened the map using the Show Map button, you can have POIs, Favourites and traffic information of the current map view shown in a clearly arranged list. Note: This function is not available if the map was opened in one of the modes Destination search, Preview, Real City 3D or Reality View. 1. Tap on any point on the map. The NEARBY list opens. It contains POIs, Favourites or traffic messages of the current map view. 2.
User’s manual NAVIGON 8410 You can configure the bend warning function at Options > Settings > Navigation > Bend Warning. 10.7 Direct Help If you arrive at the scene of an accident or have an accident yourself, it may be necessary to call for emergency aid and to give the answering office your current location. ► Tap on Options > Direct Help. The DIRECT HELP window opens. If GPS reception is good enough, the address and the geographic coordinates of your current location will be indicated.
User’s manual NAVIGON 8410 10.8 GPS Status, saving the current location In the GPS STATUS window you will find an overview of the data the navigation system calculates from the GPS signals it receives. The GPS status can be accessed from the options button in many windows. ► Tap on Options > GPS Status. The current location can be saved in the FAVOURITES list. 1. Tap on Save Position. The SAVE DESTINATION AS... dialog box opens. 2. Enter a name for the destination. 3. Tap on Save. 10.
User’s manual NAVIGON 8410 10.10 Turn-by-Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation. This list displays all of the driving instructions in table form. The map is open in Preview mode: ► Tap on Options > Turn-by-Turn List. The map was opened in Navigation mode or in Reality View mode: ► Tap on Options > Route > Turn-by-Turn List. The TURN-BY-TURN LIST window opens.
User’s manual NAVIGON 8410 3. Tap on window again. (Back) in order to close the TURN-BY-TURN LIST Removing blocks and using original routes Section blocks can be removed at any time. ► 10.11 In the TURN-BY-TURN LIST window, tap on Options > Calculate Original Route. TMC (Traffic Information) The integrated TMC receiver enables the navigation system to make use of current traffic messaging. If necessary it can change your route dynamically, for example in order to avoid a traffic jam.
User’s manual NAVIGON 8410 Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom In: The map section becomes smaller, but you will see more details. Original map section: The original map section is shown again. ► Tap on the button of the route you want to follow. - or ► Tap on the Details button. The TRAFFIC INFORMATION window opens.
User’s manual NAVIGON 8410 1 The Traffic Information button shows the type of traffic messaging listed and how many messages of this type are in the list. ► 2 3 Tap on Traffic Information in order to select the messages you want displayed. This mark indicates that the message in question comes from a PremiumTMC provider. Here you can see how serious the obstruction is: Red: The affected section of the route is fully blocked by the obstruction or involves a considerable loss of time to pass through.
User’s manual NAVIGON 8410 9 This symbol appears only when the reported obstruction affects your route. Here you see how the obstruction is treated: (Detour): An alternative route avoiding the traffic obstruction is calculated. (Ignore): This obstruction is ignored. (Automatically): You leave it to the navigation system to decide whether to calculate an alternative route or not. ► 10 10.11.3 Tap on the button to select the next alternative setting.
User’s manual NAVIGON 8410 ► Hold frequency: You can use the arrow keys in the station area to select another frequency. The system will not search for another station if reception becomes poor. Recalculate Route Tap on Recalculate Route and select how new traffic messages concerning your route are to be used. ► ► Automatically: An alternative route will be calculated automatically. The system will inform you about the recalculation.
User’s manual NAVIGON 8410 2. Enter a name for this entry, e.g. "Trip to customer X", in the Logbook Entry box. 3. Enter the mileage. 11 Media Player Integrated in the NAVIGON 8410 is a multimedia player. You can use it to listen to music, look at pictures or play back a video. Note: Listening to music too long and too loud can damage your hearing. Do not hold the loudspeaker of the NAVIGON 8410 directly against your ear! 11.
User’s manual NAVIGON 8410 11.3 Operating the media player 1 Opens the FILE MANAGER window. Here you can choose the media data which you want to play back or view. 2 Opens the SETTINGS window. Here you can configure the media player. (Refer to "Configuring the Media Player" on page 87) 3 Opens the PLAY-BACK LIST window. Here you can select play-back lists or create new play-back lists.
User’s manual NAVIGON 8410 15 (OK): Plays the current title. (Pause): Interrupts the play-back. 16 11.4 Fast forward mode in the currently played musical item or video. Selecting the media files you want to play back ► In the MEDIA PLAYER window tap on (File Manager). The FILE MANAGER window opens. At the top you will see the path of the folder whose content is now being shown. Underneath is a list of files and sub-folders.
User’s manual NAVIGON 8410 Tap on 11.5 (Back) in order to return to the MEDIA PLAYER window. Play-back lists Play-back lists are groups of media files. For example, if you like listening to a particular sequence of musical items, you can create a matching play-back list. Then you need only select this one list instead of selecting all the musical items separately each time. Media files from several folders can be listed in a play-back list. A media file can appear in several play-back lists. 11.5.
User’s manual NAVIGON 8410 4. Tap on Save as.... 5. Enter a name for the list. 6. Tap on (OK). The MEDIA FILE window opens again. 11.5.3 Selecting a play-back list 1. Tap on the window. (Play-back list) button in the MEDIA PLAYER The PLAY-BACK LIST window opens. 2. Tap on Open. The MEDIA FILE window opens. 3. Tap on the name of the play-back list you want in order to mark it. 4. Tap on OK in order to play back all the files in the marked list. - or Select a single file from the list: 11.5.
User’s manual NAVIGON 8410 Adding files 4. Tap on Edit. 5. Tap on (Add). 6. Select the files which you want to add to the play-back list. (Refer to "Selecting the media files you want to play back" on page 84) 7. Tap on OK. Changing the play-back sequence 4. Tap on Edit. 5. Tap on the file which you want to shift. 6. Tap on (Up) or (Down) in order to shift the selected file by one position up or by one position down. 7. Tap on OK. Deleting files from a play-back list 4. Tap on Edit. 5.
User’s manual NAVIGON 8410 Possible settings Repeat Here you can set the repeat mode for the files of the current play-back list (None, Current File, All). Slide show Here you can choose whether to show your pictures as a slide show and if so for how long each picture is to appear (No, 1 second, 2 seconds, 5 seconds). Note: Only pictures can be presented. For slide shows the Repeat setting must always be All.
User’s manual NAVIGON 8410 ► ► Tap on Yes if you want to start the search now and set up a connection to your mobile phone or your headset. As soon as the NAVIGON 8410 has found your Bluetooth device you can initiate the pairing (refer to "Pairing with a device" on page 90). Tap on No if you want to initiate the connection later. (Refer to chapter "Searching for and pairing Bluetooth devices" on page 89) Operating the hands-free module All functions can be reached from the HANDSFREE MODULE window.
User’s manual NAVIGON 8410 Note: In this case the phone book and recent calls are only available when the phone in question is connected. For details of how to import the phone book and recent calls refer to the chapters "Import Phone Book" on page 92 and "Import recent calls" on page 93. Searching for devices 1. Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 8410. If you want to set up a connection to a headset, the headset must be switched on.
User’s manual NAVIGON 8410 12.1.2 Pairing from the mobile phone Note: Please consult the mobile phone's manual if you are uncertain about how to carry out the following steps on the mobile phone. 1. Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 8410. To perform the pairing from the mobile phone, the functions NAVIGON 8410 and Discoverable by Others must also be activated on the Others May Connect. 2. Using your mobile phone, search for other Bluetooth devices.
User’s manual NAVIGON 8410 1. Make sure that Bluetooth is activated on your navigation device. ► ► If you want to connect to a mobile phone, make sure that Bluetooth is activated on the mobile phone and that the Discoverable by Others and Others May Connect functions are also activated. If you want to connect to a headset, make sure that the headset is switched on. (Trusted Devices) button in the HANDSFREE 2. Tap on the MODULE window. The TRUSTED DEVICES window opens.
User’s manual NAVIGON 8410 1. Set up a connection to the mobile phone whose phone book you want to import. (See chapter "Connecting to a device" on page 91) 2. Tap in the HANDSFREE MODULE window on the Phone Book button. The phone book import is started. Depending on the size of the phone book this can take some time. When the import is completed, the phone book is opened. Note: It can take some time to import a phone book depending on its size.
User’s manual NAVIGON 8410 1. Set up a connection to the mobile phone whose recent calls you want to import. (See chapter "Connecting to a device" on page 91) 2. Tap in the HANDSFREE MODULE window on the Recent Calls button. The recent calls import is started. When the import is completed, the recent calls are shown. 12.2 Taking a call When you receive a call, the INCOMING CALL window will open. The name and the number of the caller will be displayed if this information is available.
User’s manual NAVIGON 8410 3. Wait for the numbers you said to appear. Repeat steps 2 to 3 until the complete phone number is shown on the display. Say "Correction" if the last number you said was not understood correctly. 4. Say "Call". The phone number will be dialled. Calling a contact from the phone book 2. Say "Phone Book". 3. Say the name of the contact you want to call. If several entries are recognised as matching this name, a list with these entries will appear.
User’s manual NAVIGON 8410 12.3.4 Calling a contact from the phone book If the NAVIGON 8410 is connected to a mobile phone whose phone book was already imported, you can also dial numbers from the phone book. 1. In the HANDSFREE MODULE window tape on Phone Book. If the phone book of the connected phone was not yet imported, the import will be started now; refer to "Import Phone Book" on page 92. 2. Select from the phone book the contact you want to call. 3. Tap on (OK).
User’s manual NAVIGON 8410 12.3.6 Transferring a call from your mobile telephone The NAVIGON 8410 takes calls automatically from the mobile phone as soon as a Bluetooth connection is established between the two devices. 12.4 During a call You are calling using the hands-free module. The CALL IN PROGRESS window is open. 12.4.1 Moving the navigation application to the foreground You can move the navigation application to the foreground at any time.
User’s manual NAVIGON 8410 12.4.4 Transferring a call to the mobile phone ► In the CALL IN PROGRESS window, tap on Options > Use Mobile Phone. You can now continue the call from your mobile phone. 12.4.5 Ending the call ► 12.5 12.5.1 Tap in the CALL IN PROGRESS window on the Hang up button in order to end the call. Useful functions Navigating to a contact from the phone book You can also use the address of a contact in the phone book as a destination for the navigation system. 1.
User’s manual NAVIGON 8410 2. Tap on the to define. (Edit) button to the right of the Speed Call you want The MODIFY PRESET window opens. Entering a new Speed Call number or editing an existing Speed Call number 3. Tap on the (Modify Preset) button. 4. Enter the name and the number for the selected Speed Call button or edit the existing name and number. 5. Tap on OK. Adopting a number from the phone book of the mobile phone 3. Tap on the From the phone book button.
User’s manual NAVIGON 8410 Discoverable by Others: Select whether other Bluetooth-capable devices (in particular mobile phones) should be able to detect the NAVIGON 8410 (Yes or No). Others May Connect: Select whether other devices should be able to initiate a connection (Yes or No). Reconnect Automatically: Select whether the connection to the last connected phone is to be restored automatically (Yes or No) as soon it comes within range again.
User’s manual NAVIGON 8410 Some settings can have only one of two values. These settings can be (Toggle) button. All possible values are visible. recognised by the The currently valid value is highlighted in white. ► Tap on values. (Toggle) in order to switch between the possible Some settings can adopt many different values. These settings can be recognised by the 1. Tap on (List) button. The current value is visible. (List). A list with all possible values opens.
User’s manual NAVIGON 8410 14 Appendix 14.1 Technical data Dimensions Weight Operating conditions 138 x 83.5 x 18.7 mm approx.
User’s manual NAVIGON 8410 14.2 NAVIGON – Licensing Policy § 1 Scope of Regulations This Agreement regulates the relations between the user and NAVIGON AG, Schottmuellerstrasse 20 A, 20251 Hamburg, developer and proprietor of the exclusive utilization rights to the NAVIGON software (“Software”) as specified in the order. Subject matter of this Agreement shall be deemed to be copyright interests.
User’s manual NAVIGON 8410 shall in particular be deemed to be judicially and contractually prohibited. (3) The user acknowledges the imprint, trademark, trade name and patent rights of NAVIGON to the Software and the relevant appending documentation. The user is forbidden from removing, changing or in any other way camouflaging the copyright notices and identifications pertaining to existing protection rights.
User’s manual NAVIGON 8410 (2) Furthermore, the user is permitted to make copies for back-up purposes. However, fundamentally, only one single back-up copy may be made for safekeeping. The back-up copy has to be identified as such.
User’s manual NAVIGON 8410 § 8 Decompiling and Amendment of Programs The user is forbidden from retranslation of the entrusted program code into other code configurations (decompiling) as well as any other kind of inverted development of the diverse manufacturing phases of the Software (reverse engineering) or carrying out program amendments of any kind, unless if such actions should serve purposes of eliminating serious defects, especially such defects which can not be avoided by organisational or any oth
User’s manual NAVIGON 8410 14.3 Identification and serial number The navigation system comes with various identification labels (e.g. CE label, serial number, ...). (Examples: CE mark, serial number, ...) These identification labels can be found on the back of the device under a cover in the middle of the recess for the cradle. On this cover is the NAVIGON logo. If you need to see any of these labels, proceed as follows: 1. Insert a finger-nail in the recess on the top of the cover. 2.
User’s manual NAVIGON 8410 This list does not claim to be complete. Answers to many other questions can be found on the NAVIGON AG website. (Refer to "Questions about the product" on page 8) I have connected a charger to the NAVIGON 8410. A connection to a computer is shown on the display. - or I have connected the NAVIGON 8410 to a computer but it is not detected as a removable disc. The USB connector of the charger is not fully inserted in the case. 1. Unplug the connector.
User’s manual NAVIGON 8410 5. Tap on (Phone). 6. Tap on Settings > Bluetooth Settings. 7. Set Bluetooth Function to No. 8. Tap on OK. 9. Tap on (Navigation). The NAVIGATION window is now open again. I have accidentally activated demo mode. If you have accidentally activated demo mode when you start the navigation application for the first time, you can deactivate it again as follows: 1. In the NAVIGATION window, tap on Options > Settings. The SETTINGS window is opened. 2.
User’s manual NAVIGON 8410 16 Index B Bend Warning.................................... 73 Block............................................ 74, 76 Bluetooth Connect ........................................ 90 Pairing........................................... 88 Bluetooth ........... see Handsfree Module C Call Dial Number .................................. 94 Phone Book .................................. 95 Preset ........................................... 94 Recent Calls .............................
User’s manual NAVIGON 8410 Handsfree Module Delete Device ............................... 91 Dial Number .................................. 94 Enter numerals ............................. 96 Hang up ........................................ 97 Import Phone Book ....................... 92 Import recent calls ........................ 93 Incoming Call ................................ 93 Muting ........................................... 96 Open ............................................. 88 Pairing..........
User’s manual NAVIGON 8410 Navigation Application Start .............................................. 27 NAVIGON 8410 Description...................................... 9 Energy .................................... 12, 14 Installation..................................... 13 Memory card ................................. 15 Scope of Delivery............................ 8 Start .............................................. 16 TMC .............................................. 14 NAVIGON Fresh................
User’s manual NAVIGON 8410 Simulation Exit ................................................ 48 Start .............................................. 48 Software keyboard ............................ 22 Support................................................ 8 Symbols used in this manual .............. 7 T Take Me Home............................ 40, 44 TMC Preview TMC ................................ 76 Recalculate Route ........................ 80 Show.............................................
User’s manual NAVIGON Live Services English (United Kingdom)
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification.
User’s manual NAVIGON Live Services Table of contents 1 Introduction ...................................................................................119 1.1 About this manual ...............................................................................119 1.1.1 1.1.2 1.2 Legal notice.........................................................................................119 1.2.1 1.2.2 1.3 2 Questions about the product ...............................................................120 2.
User’s manual NAVIGON Live Services 7 8 Appendix .......................................................................................134 7.1 Technical data.....................................................................................134 7.2 NAVIGON Licensing Policy.................................................................135 7.3 Identification and serial number ..........................................................139 7.4 Declaration of Conformity..............................
User’s manual NAVIGON Live Services 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Names of products SMALL CAPITALS: Names of windows and dialogue boxes Bold: Highlighting of important parts in the text Underlined: Descriptions of buttons, input boxes and other elements on the user interface Underlined and italics: Names of control elements on the navigation device 1.1.
User’s manual NAVIGON Live Services 1.2.2 Trademarks All brand and trade marks mentioned in this document and registered by third parties are subject without reservation to copyright law and the proprietary rights of their respective owners. All trade marks, trade names and company names used in this document are or may be trade marks or registered trademarks of their respective owners. All rights reserved except those explicitly granted.
User’s manual NAVIGON Live Services ► Traffic Live: You can now receive traffic information from the NAVIGON Live server. This server evaluates not only information from radio stations but also floating car data from the numerous users of NAVIGON Live services. As the result, traffic jams can be detected and avoided more quickly and more reliably. The evaluation of floating car data also helps to calculate the estimated time of arrival more exactly.
User’s manual NAVIGON Live Services Note: Keep the SIM card holder in a safe place! You will need the data printed on this holder if you ever have to contact the NAVIGON Service Centre for assistance. 2.3 Description of the NAVIGON Live module 1 NAVIGON Live module 2 Mini-USB connector for connecting to the navigation device 3 Slot for the SIM card (already inserted) 4 LED 5 Mini-USB socket for the car charger cable 6 Car charger cable 2.
User’s manual NAVIGON Live Services Caution! Do not look at the display unless it is absolutely safe to do so! 2.4.2 Safety information for the NAVIGON Live module Caution! Protect the device from moisture. The device is neither waterproof nor protected against splash water. Caution! Do not open the case of the NAVIGON Live module under any circumstances. Caution! Do not expose the NAVIGON Live module to extreme heat or cold. This may damage the device or impair its function.
User’s manual NAVIGON Live Services 2.5 Preparing the NAVIGON Live module for use 2.5.1 Updating the navigation device software You have purchased a bundle comprising a navigation device and a NAVIGON Live module (NAVIGON xx50 Live): The right software is already installed on the navigation device. There is no need for an update. You have purchased the NAVIGON Live module as an add-on to an already existing navigation device: The software must be updated before you can use the NAVIGON Live services.
User’s manual NAVIGON Live Services 2.5.2 Selecting the right car charger cable You have purchased a bundle comprising a navigation device and a NAVIGON Live module: The bundle comes with the right car charger cable. Use this cable. You have purchased the NAVIGON Live module as an add-on to an already existing navigation device: The adapter in your existing charger cable may not have enough power to supply both devices (the navigation system and the NAVIGON Live module) with electricity.
User’s manual NAVIGON Live Services Caution! Connect the car charger cable only to cigarette lighters with an operating voltage of 10-24V. Note: Insert the USB connector securely in the corresponding USB sockets! Caution! Be sure to refer to all the safety information in chapter "Important safety information" on page 122. 2.5.4 Activating the NAVIGON Live services The NAVIGON Live services must be activated before they are used for the first time. Then they can be used free of charge for 3 months.
User’s manual NAVIGON Live Services 7. Tap on OK. The NAVIGATION window is opened. From here you have access to all the functions of your navigation device and all available NAVIGON Live services. 3 Changes to the navigationssoftware 3.1 Information In addition to the symbols described in the navigation software manual, the following information may be shown at the top edge of many windows: NAVIGON Live Services The NAVIGON Live Services symbol indicates the availability of the NAVIGON Live services.
User’s manual NAVIGON Live Services The Traffic Live symbol can indicate the following traffic information reception states: (Red) Connecting: The last attempt to call up traffic information from the NAVIGON Live server failed. This can be the case, for example, when travelling through a tunnel. Information which was called up previously may still be active however. (Light grey) Traffic Live Ready: Traffic information was called up successfully. The active information is up to date.
User’s manual NAVIGON Live Services 4 Using the NAVIGON Live services The NAVIGON Live services are seamlessly integrated in the navigation software. Many services are used automatically without any change to the operation of the navigation device compared to the version without NAVIGON Live services. For example, there is no change to the program flow when a traffic jam is reported.
User’s manual NAVIGON Live Services 4.1.3 Weather data for a different location You can call up weather data for every point on the map which can be entered as a destination for the navigation system. Except for Take Me Home and Show Map > Destination search you can use any possible type of entry, e.g. Enter an Address, Favourites or Search for POI. If you enter an address, it suffices to enter the town. However, you may also enter the street and the house number.
User’s manual NAVIGON Live Services For some of the parking options you are shown online information such as e.g. the number of currently free parking spaces, the currently valid price or the trend in available capacity. Some parking options are marked by a small asterisk (e.g. ). There is more information available for these parking options, e.g. opening times or the number of parking spaces for women or the number of parking spaces for the handicapped. 2. Select a parking option.
User’s manual NAVIGON Live Services 4. Enter a search term. You have an absolutely free choice of search term, but the number of hits depends greatly on you entering a suitable search term. ► Tap on (Open List) in order to be able to select from the last 30 entered search terms. 5. Tap on (OK). The RESULTS list opens. It contains the POIs which were found. Shown alongside each POI is the average rating (1 star to 5 stars). No star means that no rating was given yet. 6.
User’s manual NAVIGON Live Services ► ► ► Obstructions which cause traffic congestion can be detected and avoided more quickly and more reliably. The end of a traffic obstruction is detected more quickly and more reliably. Unnecessary detours can be avoided. Estimated times of arrival can be calculated more precisely. The Traffic Live service does not change the way you operate the navigation device; the only difference is the source of reference for the traffic information.
User’s manual NAVIGON Live Services 6 Indicating the status All key data concerning your NAVIGON Live module and the validity of the subscription to the NAVIGON Live services can be found in the NAVIGON LIVE STATUS window. ► In the NAVIGATION window tap on NAVIGON Live Status. (NAVIGON Live) > Options > The NAVIGON LIVE STATUS window opens.
User’s manual NAVIGON Live Services 7.2 §1 NAVIGON Licensing Policy Scope of Regulations This Agreement regulates the relations between the user and NAVIGON AG, Schottmuellerstrasse 20 A, 20251 Hamburg, developer and proprietor of the exclusive utilisation rights to the NAVIGON software (“Software”) as specified in the order. The subject matter of this Agreement is copyright interests.
User’s manual NAVIGON Live Services (2) Any kind of non explicitly authorised copying of the Software in its entirety or partially, any kind of non expressly authorised passing on of the Software and development of similar Software or segments of such Software or utilisation of the contractual Software as a master template shall in particular be deemed to be judicially and contractually prohibited.
User’s manual NAVIGON Live Services §5 Reproduction Rights and Access Security (1) The user may reproduce the Software if the respective copying should be necessary for operation. Necessary reproduction shall be deemed to be the installation of the program from the original data carrier to the bulk memory of the hardware used as well as loading of the program into random access memory. (2) Furthermore, the user is permitted to make copies for back-up purposes.
User’s manual NAVIGON Live Services §7 Third Party Software The Software contains third party software products which have been integrated into the contractual Software or supplied together with the contractual Software. NAVIGON fundamentally only awards such rights which are necessary for general use of the programs as components of the contractual Software and which NAVIGON is authorised to grant. No modification rights or further processing rights are incorporated therein.
User’s manual NAVIGON Live Services (4) If the user should be a businessman within the meaning of the Commercial Code, legal entity under public law or special assets under public law, all disputes which may arise in connection with the accomplishment of these contractual regulations shall fall under the jurisdiction of Hamburg. 7.3 Identification and serial number The navigation device has been provided with various identification labels (e.g. CE label, serial number, ...).
User’s manual NAVIGON Live Services 8 Index A N Activate............................................ 126 NAVIGON Live Activate....................................... 126 Configuration .............................. 133 Costs .......................................... 121 Description.................................. 122 Installation .................................. 125 Scope of Delivery ....................... 121 Settings....................................... 133 Status ...........................
User’s manual NAVIGON Live Services Traffic Information Symbols ...................................... 127 Traffic Live .................................. 132 Traffic Live Symbols ...................................... 127 Traffic Information....................... 132 W Warranty.......................................... 119 Weather Live Weather Service ......................... 129 Weather Service Weather Live .............................. 129 U Update.............................................
