Operation Manual

User’s manual NAVIGON 8410
- 18 - Password Lock
Switching off the navigation device
► Press the (On/Off) key and keep it pressed until the message
"Let go of the key to switch off the device." appears. (Approx.
6 seconds)
Note: When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly and with the window which
was active when switched off. In standby mode the device still
consumes a small amount of energy however. The battery may be flat
within a few days.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
3.1 Options
Some windows offer options that lead to more functions.
A description of all available options can be found in the chapter
"Options" on page 50.
4 Password Lock
You can protect your navigation system from unauthorised use by
creating a password.
4.1 Activating password protection
1. In the NAVIGATION window tap on Options > Settings > Options >
Password Lock
.
The N
EW PASSWORD window opens.
2. Enter a password in the New password
box and tap on Next.
3. Enter this password again in the Confirm new password
box.
4. Tap on Activate
.
Note: The password must have exactly 4 digits.
4.2 Changing a password
1. In the NAVIGATION window tap on Options > Settings > Options >
Password Lock
.