Operation Manual

User’s manual NAVIGON Live Services
- 128 - Changes to the navigationssoftware
The Traffic Live symbol can indicate the following traffic information
reception states:
(Red) Connecting: The last attempt to call up traffic information from
the NAVIGON Live server failed. This can be the case, for example,
when travelling through a tunnel. Information which was called up
previously may still be active however.
(Light grey) Traffic Live Ready: Traffic information was called up
successfully. The active information is up to date.
TMC
The TMC
symbol appears when you are drawing traffic information from
radio stations.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can indicate the following TMC reception states:
(Red) Tuning: The TMC receiver is operational but cannot find a station
that is transmitting TMC signals. There are no active traffic messages.
(Light grey and red dot) Tuning: The TMC receiver is operational but
cannot find a station that is transmitting TMC signals. Traffic messages
are active however. This can be the case, for example, when travelling
through a tunnel.
(Light grey) TMC on Standby: Traffic information can be received.
If your navigation device has a TMC receiver, you will find a description
of the TMC function in the corresponding manual.
3.2 Enter Coordinates
Compared with the version without NAVIGON Live services, the entry
of geographic coordinates has been simplified.
1. In the N
AVIGATION window, tap on New Destination > Enter
Coordinates.
The E
NTER COORDINATES window opens.
2. Enter the coordinates of your destination as described in the
manual issued for your navigation device.