Operation Manual

Working With Routes
Navigation
44 NAVIGON 7100 User’s Guide September 2007
NAVIGON, INC. Revision 1.1
Navigation
The route must be calculated first. You can begin navigation or view a simulation of the
route.
Calculating and displaying routes
You can calculate and display a several versions of a planned route to determine which
route you wish to take. To calculate and display a route, the starting point and at least one
route point must be entered.
On the
ROUTE PLANNING WINDOW:
1. Load a saved route.
- OR -
1. Create a starting point and at least one route point.
2. Tap the
Show Route button.
The map opens in Preview mode.
The starting point and the route points are marked by flags. For each stage, the
distance and the estimated trip time is given. This information is also displayed for
the entire route.
3. Tap the
Start Navigation button or start driving.
Viewing the Route Profile
The calculation of a route is based on route options.
1. Create a new or load a saved route.
2. Tap Options >
Route Profile.
The map opens in Preview mode.
The starting point and the route points are marked by flags. For each stage, the
distance and the estimated trip time is given. This information is also displayed for
the entire route.
3. When finished, press
Done to return to the map in Preview mode.
If GPS reception is impaired, navigation is interrupted. The navigation software remains
active.
As soon as GPS reception is restored, the navigation system calculates any change of
position which has occurred in the meantime. Navigation can continue.
Note: If you change the route options, these remain valid for subsequent navigation.
You can get information regarding changing individual route profiles by tapping the cor-
responding Help
button.