Operation Manual

September 2007 NAVIGON 7100 User’s Guide 11
Revision 1.1 NAVIGON, INC.
Basic Operations
Starting the NAVIGON 7100
1. Press and hold the (On/Off/Standby) switch for at least 6 seconds.
2. If password protection has been activated, the E
NTER PASSWORD WINDOW opens.
3. Enter the password and tap Continue
.
Each time the navigation device is turned on, the following message appears
when the software is started again:
"Please do not operate the device while driving.
Road conditions and traffic conditions enforced by
law enforcement shall always supercede guidance
given by your navigation device.
User agrees that he/she has read and accepts the
End User License Agreement (EULA) contained in
the User Manual."
4. After you have read and fully understand the text, tap OK
.
Note: If you do not accept these instructions, tap Cancel
to quit the navigation
software.
The M
AIN WINDOW displays.
The Main Window
The MAIN WINDOW opens when the navigation software starts.
You can reach all of the navigation software functions from this window.
New Destination
Tap this button to:
• Select an address by city or street. (See page 24.)
• Select a POI as a destination. (See page 26.)
• Select a POI by tapping on the map. (See page 33.)