User's Manual

9.2.3
9.3
9.3.1
9.3.2
User’s manual NAVIGON 70/71
Where you have to save the file is explained in chapter "Memory
location for your own POIs and your own symbols" on page 73.
Symbols for your own POIs
For each sub-category of your own POIs you can create a symbol
which is used to represent the destinations of this sub-category on the
map.
These symbols must be graphic files with the following characteristics:
File format BMP (Bitmap) or PNG (Portable Network Graphic)
Size max. 40x25 pixels
The graphic files must be saved in the same folder as the files with the
POIs.
Where you have to save the file is explained in chapter "Memory
location for your own POIs and your own symbols" on page 73.
The file name must be the same as the name of the category.
Example:
Destinations of the XYZ sub-category are saved in the 'XYZ.CSV' file.
They are represented on the map by the 'XYZ.BMP'symbol.
Screenshots
You can create and save screenshots of the content currently shown on
the screen at any moment.
Enabling screenshots
1. In the NAVIGATION window tap on Options > Settings > General >
Enable Screenshots.
2. Select whether you want to enable screenshots (Yes) or not (No).
The (Screenshots) button appears at the bottom right edge of
the screen.
Creating a screenshot
Tap on the (Screenshots) button.
The screen is saved as a graphic. The (Screenshots) button is
not shown in the figure.
The screenshots are saved in the \ScreenShots folder. This folder can
be found either in the internal memory of the navigation device, on the
inserted memory card or in both memories.
Useful functions - 75 -