User's Manual

User’s manual NAVIGON 70/71
You can access the internal memory of the navigation device as
follows:
Connect the navigation device to your computer with a USB cable.
The internal memory of the navigation device is detected as the
drive 'NAVIGON'.
If a memory card is inserted in the navigation device, it will be
detected as the drive 'NAVIGON SD'.
The NAVIGON folder is located in the root directory of the detected
drive.
9.2.2
- 74 -
Creating your own destinations
1. Open an empty document in an editor of your choice (Notepad,
Microsoft Word, Microsoft Excel).
2. For each destination create a data record (one line) with the
following form:
Longitude. Begin the entry with a minus sign if you want to
enter a western degree of longitude. The longitude must be
entered as a decimal number with a dot as the decimal sign.
Comma (as list separator)
Latitude. Begin the entry with a minus sign if you want to enter
a southern degree of latitude. The latitude must be entered as
a decimal number with a dot as the decimal sign.
Comma (as list separator)
Name of the destination. Any name is possible, but no commas
are allowed. If the use of a comma is indispensable, precede it
with a backslash ('\').
Comma (as list separator)
Additional information. This box can also remain empty. If the
additional information is a phone number, then write
PHONENUMBER= in front of the phone number.
Enter (in order to begin a new data record)
The address does not have to be included in the data record. It is
shown automatically when you select this POI for navigation.
Example:
9.94302,49.79906,NAVIGON AG,PHONENUMBER=+49 931~
3. Repeat step 2 for each destination you want to save in this file.
4. Save the file under any name as a CSV file. Please note that the file
name will appear in the navigation system as a sub-category! This
means that if you save a file under the name 'XYZ.CSV', the
destinations of this file will appear in the sub-category XYZ.
Useful functions