User's Manual

User’s manual NAVIGON 70/71
8.4 Map in Standard mode
The map is always in Standard mode when you are not navigating,
have not calculated a route and are not searching for a destination on
the map.
Under the following circumstances the map switches automatically to
Standard mode:
You begin a trip while the NAVIGATION window is open. The switch
takes place after only a short while.
You reach the destination of a navigation in Vehicle mode.
To open the map:
In the N
AVIGATION window tap on Show Map.
Note: If GPS reception is not good enough to establish your location, the
map will be opened in Destination search mode.
The following features are typical for this view:
Indicated in the middle of the lower third is your current position
(orange arrow). The map view follows your movements so that your
position is always visible on the screen.
The scale of the map changes according to your speed.
Map options in Standard mode
1. Open the button bar. (Refer to "Dynamic button bar", page 55)
2. Tap on (Options).
- 58 -
A window with several buttons opens.
The most important functions for navigation can be reached via buttons
with symbols.
Working with the map