User's Manual

User’s manual NAVIGON 70/71
Sightseeing Tours: Opens the SIGHTSEEING TOURS window. There you can
select a sightseeing tour and start the navigation on a tour. (Refer to
"Sightseeing Tours" on page 83.)
Simulation: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Skip next destination: Tap on this button to omit the next route point. This button
is active only when at least 2 route points still lie ahead of you. (Refer to
"Tracks and multi-leg routes" on page 46.)
Start Recording, Stop Recording: Starts or ends the recording of a track. (Refer
to "Tracks" on page 76.)
Traffic: Opens the T
RAFFIC INFORMATION window in which pending reports are
listed. (Refer to "TMC (Traffic Information)" on page 87.)
Turn-by-Turn List: Shows detailed directions for the route, including all points at
which you must turn. (Refer to "Turn-by-Turn List" on page 86.)
8
8.1
8.2
8.2.1
- 54 -
Working with the map
Selecting the navigation map
Each country has its own navigation map. Seamless navigation over
several maps on one continent is possible however if a continuous
route can be calculated with the maps saved on the device.
Even if maps of countries in other continents are available on the
navigation device, it can only ever work with the maps of a single
continent.
Tap in the N
AVIGATION window on Options > Settings > Map Display in
order to see which maps are currently in use. Here you can also select
a different continent if the navigation device contains any maps of
countries on other continents.
Button bar
A bar with buttons provides access to all the functions available for
operating the map.
Static button bar
The static button bar is available on the map in Preview mode and
Destination search mode.
The static button bar can be seen at the bottom edge of the screen.
Working with the map