User's Manual

5.3
5.4
5.5
User’s manual NAVIGON 70/71
If the navigation system has not understood your instruction or if you do
not say anything within a certain time, the negative acknowledgement
tone (two short low-pitch tones) will sound.
Say the command again.
If the navigation system has not understood you after several
repetitions, the prompt "Say Help" will appear.
Note: Navigation instructions and warnings are muted for as long as the
navigation device expects to receive voice commands from you.
Help
Say only "Help" if you want to know which voice commands are
currently possible. In nearly all windows in which voice commands are
supported the navigation system will then tell you which commands you
can say in the current window.
Deactivation of the voice commands function
The voice commands function will be deactivated under the following
conditions:
If you operate the navigation device with your finger while a voice
command is expected from you.
If a call is received and during an active phone call if the navigation
device is being used as a hands-free module.
Configuring the voice commands function
You can configure for which tasks you want to use voice commands.
In the N
AVIGATION window tap on Options > Settings > General >
Use Voice Command.
Select the tasks for which you want to use Voice Command:
Complete: You can use all the voice command functions.
Answering: You can enter addresses and answer questions
asked by the navigation device.
Entering Addresses: You can enter only addresses with the
voice command function.
Note: For details of how to enter a destination using voice commands
refer to the chapter "Entering a destination by voice commands" on
page 30.
Note: For details of how to make a call using voice commands refer to
the chapter "Making a call with the voice commands function" on
page 102.
Voice Command - 27 -