User's Manual

User’s manual NAVIGON 70/71
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
13 Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the navigation system.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON website. (Refer to "Questions
about the product" on page 9.)
I have connected a charger to the navigation device. A connection to a
computer is shown on the screen.
-or-
I have connected the navigation device to a computer but it is not
detected as a removable disc.
The USB connector of the charger is not fully inserted in the case.
-or-
The USB connector is not connected correctly.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Insert the USB connector from the charger into the corresponding
socket of the navigation device swiftly as far as it will go. (Refer to
"Description of the navigation device" on page 10.)
My navigation device makes no response any longer, the screen is frozen.
Perform a reset.
Use a thin object to press the Reset
key. (Refer to "Description of
the navigation device" on page 10.)
The software will be restarted. Your settings and your saved
destinations and routes will be retained.
- 122 - Troubleshooting