User's Manual

User’s manual NAVIGON 70/71
2. Select from the phone book the contact you want to navigate to.
The S
ELECTED PHONE BOOK ENTRY window opens. It shows up to
two addresses and up to four phone numbers which have been
saved for the selected contact.
3. Tap on Start Navigation.
If more than one address is available for the selected contact, all
the addresses will be shown.
Tap on the address to which you want to navigate.
You can also select addresses from the phone book in the navigation
software to act as destinations. For more details refer to the chapter
"Imported Addresses from the phone book" on page 41.
10.6.2 Opening the mailbox
You can read text messages from the mailbox of the active telephone.
Note: The number of SMS that can be imported from the mobile phone
is limited to 15.
1. In the H
ANDSFREE MODULE window, tap on Options > SMS inbox.
The SMS
INBOX list opens. The entries are sorted in chronological
order. The symbol to the right of each entry indicates whether the
text message has been opened at least once:
(Unopened text message)
(Opened text message)
2. Tap on the entry you want.
Note: The SMS
INBOX list is available to the hands-free module only for
as long as the hands-free module is connected to the mobile phone. It
is updated automatically each time it is opened.
10.7 Configuring the hands-free function
The hands-free module contains a number of settings that can be
individually configured.
10.7.1 Preset
The hands-free module of the navigation device contains four Speed
Call buttons that can be individually configured.
1. In the H
ANDSFREE MODULE window, tap on Options > Modify Preset.
The P
RESET window opens.
- 106 - Handsfree Module