User's Manual

Tap on (Navigation).
User’s manual NAVIGON 70/71
While a call is in progress, the (Call in Progress) symbol is visible
in the top right corner of the display. The number indicates which of the
connected phones is being used to make the call (here: "Phone 1").
Tap on
window.
(Phone) in order to open the CALL IN PROGRESS
10.5.2 Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. Tap on Keyboard.
2. Enter the desired numbers.
3. Tap on
window.
(Back) in order to open the C
ALL IN PROGRESS
10.5.3 Muting the microphone
During the call, you can mute the microphone so that you can talk to
someone without the interlocutor hearing.
In the C
ALL IN PROGRESS window, tap on
switch off the microphone.
(Muting) to
The person on the other end of the line can no longer hear you. The
modified symbol on the button indicates this.
Tap on (Muting) to switch the microphone on again.
10.5.4 Transferring a call to the mobile phone
In the CALL IN PROGRESS window, tap on Options > Use Mobile
Phone.
You can now continue the call from your mobile phone.
10.5.5 Ending the call
Tap in the CALL IN PROGRESS window on the Hang up button in
order to end the call.
10.6 Useful functions
10.6.1 Navigating to a contact from the phone book
You can also use the address of a contact in the phone book of the
active telephone as a destination for the navigation system.
1. In the H
ANDSFREE MODULE window tap on Phone Book.
Handsfree Module - 105 -