User's Manual

User’s manual NAVIGON 70/71
Say the number in front of the phone number that you want to call.
The connection will be established.
Note: The Voice Command function is not available for every
language. If it is not available, the H
ANDSFREE MODULE window will not
show the Voice Command button but the Settings buttons.
10.4.2 Dialling a telephone number
1. In the HANDSFREE MODULE window activate the mobile phone which
you want to use to make the call. (Refer to "Activating a mobile
phone" on page 98.)
2. Tap in the H
ANDSFREE MODULE window on the Keyboard button.
The T
ELEPHONE NUMBER window opens.
3. Enter the desired telephone number.
4. Tap on the Call button.
10.4.3 Dialling a Speed Call number
A total of 4 speed call buttons are available. These buttons can be
configured separately for each paired mobile phone.
1. In the H
ANDSFREE MODULE window activate the mobile phone which
you want to use to make the call. (Refer to "Activating a mobile
phone" on page 98.)
2. Tap in the H
ANDSFREE MODULE window on the corresponding
Speed Call button.
Note: If the selected speed call button has not been configured yet, it
will be labelled with just three dots (…). If you tap on the symbol, the
M
ODIFY PRESET window will open. (Refer to "Preset" on page 106.)
10.4.4 Calling a contact from the phone book
You can select numbers from the phone book of the active telephone.
1. In the H
ANDSFREE MODULE window activate the mobile phone which
you want to use to make the call. (Refer to "Activating a mobile
phone" on page 98.)
2. In the H
ANDSFREE MODULE window tap on Phone Book.
If the phone book of the active phone was not yet imported, the
import will be started now. (Refer to "Import Phone Book" on
page 99.)
3. Select from the phone book the contact you want to call.
The S
ELECTED PHONE BOOK ENTRY window opens. It shows all the
phone numbers and addresses which have been saved for the
selected contact.
Handsfree Module - 103 -