Operation Manual

User’s manual NAVIGON 33xx | 43xx max
- 44 - Navigation
2D/3D: Changes between 2D and 3D mode. The symbol indicates the current
mode.
Add to Route
: Opens the route planning. The address specified will be added as
a route point. (Refer to "
Multi-leg routes" on page 39.)
Block
: Opens a window in which you can block a section of the route lying
ahead in order to calculate a route which avoids this section, e.g. if you
have heard on the radio of a traffic jam relating to this section. (Refer to
"
Block" on page 55.)
Day/Night
: Changes between "Day" and "Night" display modes. The symbol
indicates the current mode.
Delete All
: Deletes all destinations in the list (LAST DESTINATIONS list or
F
AVOURITES list, depending on where you opened the options). The list
is then empty. A dialog window prompts you to confirm deletion.
Delete
: Deletes the selected destination from the LAST DESTINATIONS or
F
AVOURITES list or the selected route from the SAVED ROUTES list. A
dialog window prompts you to confirm deletion.
Direct Help
: Opens a window in which you can find in quick and uncomplicated
manner the addresses and phone numbers of offices in your direct
vicinity that can be useful in emergencies. (Refer to "
Direct Help" on
page
54.) If the navigation device is connected to a mobile phone, you
can initiate a call directly from here. (Only NAVIGON 4350 max.)
Enter Coordinates
: Opens the ENTER COORDINATES window. Here you can enter
the geographic coordinates of your destination. (Refer to "
Enter
Coordinates" on page
27.)
Factory Settings
: Resets all settings to the as-delivered state. Routes and
saved destinations are deleted. The software is re-started and behaves
as if started for the first time after being purchased. (Refer to "
Switching
on the NAVIGON 33xx | 43xx max" on page
14)
NAVIGON 4350 max: Deletes in addition all the connection data of
already paired devices.
GPS Status
: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save the data of your current
location. (Refer to "
GPS Status, saving the current location" on
page
55)
Home Address
: Saves the selected destination as your home address. You can
then always start navigation to this destination very quickly by tapping in
the N
AVIGATION window on Take Me Home.