Operation Manual

User’s manual NAVIGON 14xx | 24xx
- 40 - Options
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No further suggestion
is then shown on the button in
question.
Navigation
► Tap on the button of the route which you want to use for the
navigation.
(Only NAVIGON 24xx) If you select a route for which traffic obstructions
have been announced, the P
REVIEW TMC window may open before
navigation starts. (Refer to "Preview TMC" on page 67)
► Select whether you want to use the original route (Current Route) or
a detour (Alternative route
).
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
► Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
► Tap on Cancel. The map opens in Preview mode.
6 Options
Some windows offer options that lead to more functions.
► Tap on Options to open the options list.
► Tap on the option you would like to use.
► If you would like to quit the options list without selecting an option,
tap on the Options
button again.
2D/3D
: Changes between 2D and 3D mode. The symbol indicates the current
mode.
Add to Route
: Opens the route planning. The address specified will be added as
a route point. (Refer to "Multi-leg routes or tracks" on page 35)
Block
: Opens a window in which you can block a section of the route lying
ahead in order to calculate a route which avoids this section, e.g. if you
have heard on the radio of a traffic jam relating to this section. (Refer to
"Block" on page 64)