Operation Manual

Acknowledging a message

The following options are available in the alarm dialog for acknowledging a message:

Option Result

Close Sets the alarm state to acknowledged, meaning that you are aware of the alarm

condition. The siren / buzzer will stop and the alarm dialog will be removed.

The alarm will however remain active in the alarm listing until the reason for the

alarm has been removed.

Disable Disables the current alarm setting. The alarm will not show again unless you

turn it back on in the Alarms dialog.

There is no time-out on the alarm message or siren. They remain until you acknowledge the

alarm or until the reason for the alarm is removed.

Alarms dialog

All alarms are setup in the Alarms Settings dialog.

The alarm dialogs can also be activated from the Tools panel.

The alarm dialogs includes information about active alarms and alarm history.

Alarms| NSS evo2 Operator Manual