Operation Manual

Audio tools
Enter a short description of your concept here (optional).
Icon Tuner VHF Playback
Signal strength N/A N/A
N/A N/A
Tap to toggle on/off
repeat function. The
icon is colored when
the function is active.
N/A N/A
Tap to toggle on/off
shuffle mode. The
icon is colored when
the function is active.
Tap to display menus used for settings up zones and master control
Tap to display the
favourite stations for
the tuner
Tap to display the
favourite channels for
the VHF
Tap to display the
native menu for
active source
Tap to display optional settings for active source
Setting up the audio system
Enter a short description of your topic here (optional).
The speakers
Speaker zones
The NSS evo2can be set up to control different audio zones. Number of zones depends on
the audio server connected to your NSS evo2system.
You can adjust balance, volume and volume limit settings individually for each zone.
Adjustments to the bass and treble settings will alter all zones.
Master volume control
By default the volume for all speaker zones are adjusted when you adjust the volume on an
NSS evo2 unit. You can define which zones shall be altered when you increase/decrease the
volume from the NSS evo2 unit.
Selecting tuner region
Before playing FM or AM radio and before using a VHF radio you must select the appropriate
region for you location.
Detaching Sirius from the AUX source
Enter a short description of your topic here (optional).
If a Sirius radio is connected to the FUSION radio/server, the AUX source will be automatically
attached to the Sirius feed. Sirius will then appear in the source list when the FUSION server
is active.
To use the AUX source for a different device, the Sirius must be detached from the AUX
source.
Ú
Note: To use SiriusXM an optional SiriusXM tuner must be connected to the FUSION server.
Audio| NSS evo2 Operator Manual
81