Operation Manual

Instrument panels

The instrument panels consists of multiple gauges - analog, digital and bar - that can be

customized to display selected data. The instrument panel displays data on dashboards, and

you can define up to ten dashboards within the instrument panel.

Note: To include fuel/engine information, engine and tank information has to be configured

from the Settings panel.

Dashboards

Three dashboard layouts are predefined to display gauges showing information about vessel,

navigation information and angler requirement.

You switch between a panel’s dashboards by tapping the left and right side of the panel, or

by selecting the dashboard from the menu.

Vessel dashboard Navigation dashboard Angler dashboard

Note: Additional dashboards can be activated from the menu if other systems (i.e. CZone or

Mercury) are present on the network.

Customizing the Instrument panel

You can customize the Instrument panel by changing the data for each of the gauges in the

dashboard, by changing the dashboard layout, and by adding new dashboards. You can also

set limits of analog gauges.

All edit options are available from the Instrument panel menu.

Available editing options will depend on which data sources that are connected to your

system.

Edit a dashboard

Activate the dashboard you want to edit, then;

1. Activate the menu

2. Select the edit option

3. Tap the gauge you want to change. Selected gauge is indicated with a blue background

4. Select information to be display, limits and eventually change the source for the information

5. Save your changes by selecting the save option in the menu

Instrument panels| NSS evo2 Operator Manual