Operation Manual

Starting a route from the chart panel
Tap a route on the panel, and then select the route navigation option from the menu.
You can tap a routepoint to start navigating from a selected position.
Start navigating a route from the Route dialog
You can start navigating from the Route dialog, activated by:
• Selecting the Route tool from the Home page
• Selecting the route details from the menu
Cancel navigation
When you are navigating a route the menu will include an option for cancelling the route.
Navigating with the autopilot
When you start navigation on a system with autopilot functionality, you will be prompted to
set the autopilot to navigation mode.
If you choose not to engage the autopilot, the autopilot can later on still be set to navigation
mode from the pilot menu.
For more information about autopilot functionality, refer to "Autopilot" on page 37.
Navigation settings
Navigating | NSS evo2 Operator Manual
35