Operation Manual

Data Fields
Enter a short description of your concept here (optional).
The Steer panel offers the following information:
DTD Distance to destination
BTW Bearing to waypoint
SOG Speed over ground
COG Course over ground
TTD Time to destination
ETA Estimated time of arrival at next waypoint
VMG Velocity Made Good towards next waypoint.
STEER Course to steer towards next waypoint
Position panels
You can switch between displaying the Nav panel or the Position panel. The Position panel is
activated from the menu.
By default, there is one position panel available showing GPS position.
If Loran is enabled, there will be two position panels. This is indicated with arrow symbols on
left and right side of the panel.
You toggle between the panels by tapping the left or right side of the panel.
GPS position info Loran position info
Data fields
Position in lat. and lon. (GPS) or as Loran GRI and station values
Time and date
SOG Speed over ground
COG Course over ground
DTD Distance to destination
TTD Time to destination
Navigate to cursor position
You can start navigating towards cursor position on any chart, radar or echosounder
application panel.
Tap the selected destination on the panel, and select the go to cursor option in the menu.
Navigate a route
You can start navigating a route from the chart panel or from the Route dialog.
When route navigation is started, the menu will expand showing options for canceling the
navigation, for skipping a waypoint, and for restarting the route from current vessel position.
34
Navigating | NSS evo2 Operator Manual