Operation Manual

Waypoints, routes and tracks

Waypoints

A waypoint is a user generated mark positioned on a chart, on a radar image or on an

echosounder image. Each waypoint has an exact position with latitude and longitude

coordinates. A waypoint positioned on an echosounder image, will in addition to position

information have a depth value.

A waypoint is used to mark a position you later may want to return to. Two or more

waypoints can also be combined to create a route.

Saving waypoints

Enter a short description of your concept here (optional).

You can save a waypoint at a selected position by tapping the panel, then selecting the new

waypoint option in the menu.

• If your unit has a MARK key, you can press this key to immediately save a waypoint. If the

cursor is active the waypoint will be saved at cursor position. If the cursor is not active the

waypoint will be saved at your vessel's position.

Moving a waypoint

Enter a short description of your task here (optional).

1. Tap the waypoint you want to move

- The waypoint icon will expand to indicate that it is active

2. Activate the menu and select the move option

3. Tap the chart to select a new position for the waypoint

4. Confirm the new position py pressing the rotary knob

The waypoint is now automatically saved at the new position.

Edit a waypoint

You can edit all information about a waypoint from the Edit waypoint dialog. This dialog is

activated by tapping the waypoint's pop-up, by pressing the rotary knob, or from the menu

when the waypoint is activated.

The dialog can also be accessed by from the Waypoints tool on the Home page.

Waypoint alarm settings

You can set an alarm radius for each individual waypoint you create. The alarm is set in the

Edit waypoint dialog.

Note: The waypoint radius alarm must be toggled ON in the alarm panel to activate an alarm

when your vessel comes within the defined radius.

Waypoints, routes and tracks | NSS evo2 Operator Manual