Operation Manual

Insight view options
Enter a short description of your concept here (optional).
Insight Chart Details
Enter a short description of your concept here (optional).
Low Basic level of information that cannot be removed, and includes information
that is required in all geographic areas. It is not intended to be sufficient for
safe navigation
Medium Minimum information sufficient for navigation
Full All available information for the chart in use
Insight chart categories
Insight charts includes several categories and sub-categories that you can turn on/off
individually depending on which information you want to see on your display.
Land Exaggeration and Water Exaggeration
Graphical settings available in 3D mode only. Exaggeration is a multiplier applied to the
drawn height of hills on land, and troughs in water to make them look taller or deeper.
Navionics specific chart options
Enter a short description of your concept here (optional).
Orientation, Look ahead, 3D and Change to Navionics/Change to Insight are common
for all chart types. These features are therefore described previously in this section.
Community edits
Toggles on the chart layer including Navionics edits. These are user information or edits
uploaded to Navionics Community by users, and made available in Navionics charts.
For more information refer to Navionics information included with your chart, or to Navionics
website: www.navionics.com.
Navionics chart settings
Enter a short description of your concept here (optional).
Colored Seabed Areas
Used for displaying different depth areas in different shades of blue.
Presentation type
Provides marine charting information such as symbols, colors of the navigation chart and
wording for either International or US presentation types.
Annotation
Determines what area information, such as names of locations and notes of areas, is available
on display.
Chart details
Provides you with different levels of geographical layer information.
Safety depth
The Navionics charts use different shades of blue to distinguish between shallow and deep
water.
The safety depth sets the limit for which depths that shall be drawn without blue shading.
Ú
Note: The built in Navionics database features data down to 20 m, after which it is all white.
Contours depth
Determines which contours you see on the chart down to the selected safety depth value.
Charts | NSS evo2 Operator Manual
25