Operation Manual

Positioning a Man Over Board mark

If an emergency situation should occur, you can position a Man Over Board mark at the

vessel’s current position by pressing the Home key followed by the MOB button on the

Home page.

When you activate the MOB function the following actions are automatically performed:

• a MOB mark is positioned at the vessel’s position

• the display switches to a zoomed chart panel, centered on vessel position

• the system displays navigation information back to the MOB mark

Multiple MOB marks are positioned by repeated presses on the MOB button. The vessel will

continue to show navigation information to the initial MOB mark. Navigation to subsequent

MOB marks will need to be done manually.

Cancel navigation

The system will continue to display navigating towards the MOB mark until you select to

cancel the navigation from the menu.

Delete a MOB mark

Enter a short description of your task here (optional).

1. Tap the MOB mark to activate it

2. Tap the MOB mark's pop-up to display the MOB mark dialog

3. Select the delete option in the dialog

A MOB mark can also be deleted from the menu when it is activated. See also the "Waypoints-

Routes-Tracks" on page 29 section.

Screen capture

Simultaneously press the Home and Power keys to take a screenshot. By default, screen

captures are saved to internal memory.

Refer to the "Tools" on page 94 section for how to view and manage files.

Basic operation | NSS evo2 Operator Manual