User's Manual

86 |
Setup | RS90 Operating Manual
To enable or disable automatic channel switching:
1. Select MENU → DSC SETUP → AUTO SWITCH.
2. Scroll to ON or OFF as required and press [OK].
Setting up DSC test reply
You can set up the radio to respond to incoming DSC TEST calls with
an automatic or manual response.
1. Select MENU → DSC SETUP → TEST REPLY.
2. Scroll to AUTO or MANUAL as required and press [OK].
• AUTO
On receiving a DSC TEST call, waits for 10 seconds, and then
automatically acknowledges the call.
• MANUAL
On receiving a DSC TEST call, requires you to press the [ACK] soft
key to acknowledge the call.
For information on receiving a DSC test call, see “Receiving a DSC
test call” on page 64.
MENU SELECT
CONTRAST
GPS/DATA
RADIO SETUP
DSC SETUP
USA
C
16
Hi
DSC
PRI
DSC SETUP
INDIV REPL
DSC FUNC
LL REPLY
AUTO SWITC
USA
C
16
Hi
DSC
PRI
AUTO SWITCH
ON
OFF
USA
C
16
Hi
DSC
PRI
MENU SELECT
CONTRAST
GPS/DATA
RADIO SETUP
DSC SETUP
USA
C
16
Hi
DSC
PRI
DSC SETUP
DSC FUNC
LL REPLY
AUTO SWITCH
TEST REPLY
USA
C
16
Hi
DSC
PRI
TEST REPLY
AUTO
MANUAL
USA
C
16
Hi
DSC
PRI
Draft v5.0
27 Feb 2014