User's Manual

| 19
Getting started | RS90 Operating Manual
¼ Note: A wireless handset can only switch itself on and off. See
“Switching on a wireless handset” on page 19.
Switching o the system
The system is switched off by holding down the [X] key on a wired
handset until the display shows “Release the key to power off.”
Just one handset
1. In standby mode, press [X] on the wired handset until the display
shows “Release the key to power off.”
2. Release the [X] key.
More than one wired handset
HS1 (handset 1) has a power-off menu. All the other handsets
simply power themselves off as above.
Handset 1 power-off menu:
• SYSTEM
Turns off all handsets and the transceiver.
• HS1
Turns off the handset itself.
Displays “SYSTEM IS WORKING” with no backlight.
¼ Note: You can ignore the power-off menu and keep holding down
[X] until the display shows “Release the key to power off.”
Switching on a wireless handset
• Press and hold [X] until the display illuminates.
The display shows “Searching,” then “Connecting,” then the main
operating screen.
¼ Notes:
• This only switches on the individual wireless handset, not the
transceiver.
• If the transceiver is off, the wireless handset continues to display
“Searching.”
Draft v5.0
27 Feb 2014