User's Manual

| 95
Setup | RS90 Operating Manual
Reset to factory defaults
This option returns every setting in the RS90 to factory default
values.
However, MMSI settings and entries in your buddy list are preserved.
1. Select MENU → RESET.
2. Select YES to confirm and reset the radio, or NO to exit without
resetting.
Backlight level
This option sets the brightness of the LCD screen and keypad.
1. Select MENU → BACKLIGHT → LEVEL.
2. Use the ▲ and ▼ keys to set the level required.
3. Press [OK] to enable the setting and return to the menu.
¼ Notes
• The DISTRESS key backlight cannot be turned down.
• If the backlight setting is set to level 0 (off), the backlight will
automatically turn ON at level 1 if the radio detects any DSC activity,
or any buttons are pressed. The backlight will return to level 0 (off)
after 10 seconds of inactivity.
Backlight N2K GROUP
An N2K group combines N2K devices, such as a chart plotter, with
the RS90 so that the backlight of the whole group can be controlled
from one menu.
1. Select MENU → BACKLIGHT → N2K GROUP.
2. Select the N2K group you want to control.
¼ Notes:
• NONE means the backlight adjustment will control just the RS90.
MENU SELECT
AIS SETUP
GPS SIM
HS SETTING
RESET
USA
16
Hi
DSC
PRI
RESET RADIO
ARE YOU SURE
YES
NO
USA
16
Hi
DSC
PRI
MENU SELECT
WAYPOINT
N2K DATA
BACKLIGHT
BUDDY LIST
USA
C
16
Hi
DSC
BACKLIGHT
LEVEL
N2K GROUP
USA
C
16
Hi
DSC
BACKLIGHT
LO HI
PRESS OK
USA
C
16
Hi
DSC
BACKLIGHT
LEVEL
N2K GROUP
USA
16
Hi
DSC
PRI
N2K GROUP
NONE
SIMNET
USA
16
Hi
DSC
PRI
GROUP 1
GROUP 2
Draft v5.0
27 Feb 2014