User's Manual

102 |
Appendices | RS90 Operating Manual
Appendix 5 - Beep tones and call alerts
Name Description
Error 2 short beeps
Acknowledge 1 long beep
Alarm Two-tone ring; repeated for 2 minutes or until any key is pressed
LL position call alert Friendly 5-tone ring sequence; press [SILENC] to cancel
WX alert/SAME alert Ear-catching multi-tone sequence
ROUTINE call alert Friendly 5-tone ring sequence; press [SILENC] to cancel
URGENCY call alert Two-tone ring; repeated for 2 minutes or until [SILENC] pressed
SAFETY call alert Two-tone ring; repeated for 2 minutes or until [SILENC] pressed
DISTRESS call alert Two-tone ring; repeated for 2 minutes or until [SILENC] pressed
Appendix 6 - Warning Messages
GPS DATA LOST!!
The GPS signal has been lost. The connection may be broken.
DSC FUNCTION DISABLED ENABLE IN SETUP
The DSC function is disabled. For further inofrmation, see “Enabling
DSC functionality” on page 84.
ATIS MODE DISABLE SCAN
Scan is automatically disabled in ATIS mode. For further information,
see “ATIS” on page 65
EXCESSIVE VOLTAGE!!!
This warning will be displayed if the input voltage to the transceiver
exceeds 16 V.
Appendix 7 - Features
VHF radio features
• Communication Mode: Simplex and Semi-Duplex
• Dual/Tri Watch capability.
• Special key for quick selection of your three favourite channels.
• All channel priority scan
Draft v5.0
27 Feb 2014