User's Manual
Table Of Contents
- Safety and operational information
- Section 1 - General information
- Section 2 - Controls and keys
- Section 3 - Operating the radio
- Section 4 - Advanced setup
- 4-1 Waypoint
- 4-2 Backlight adjustment
- 4-3 Lamp timer
- 4-4 Buddy list (Manage your buddy list)
- 4-5 Contrast adjustment
- 4-6 GPS/DATA
- 4-6-1 Manual (Manually enter your position and UTC time)
- 4-6-2 Settings: LL display (Show or hide your position)
- 4-6-3 Settings: Time display (Show or hide the time)
- 4-6-4 Time offset (Local time)
- 4-6-5 Settings: Time format (12 or 24 hour clock)
- 4-6-6 Settings: COG/SOG (Course & speed display options)
- 4-6-7 GPS alert
- 4-6-8 Turn GPS ENABLE on/off
- 4-6-9 Set Magnetic Variation (MAG VAR)
- 4-7 Radio setup
- 4-7-1 Channel Bank selection (UIC)
- 4-7-2 Channel name editing (CH NAME)
- 4-7-3 Ring volume adjustment (RING VOLUME)
- 4-7-4 Beep volume adjustment (KEY BEEP)
- 4-7-5 Select unit (UNITS)
- 4-7-6 Set the Priority channel (WATCH MODE)
- 4-7-7 Weather alerts (WX ALERT)
- 4-7-8 Set NMEA output (NMEA OUT)
- 4-7-9 Favourite Channel Setup (FAV CH SETUP)
- 4-8 DSC setup
- 4-8-1 Enter or check your user MMSI (USER MMSI)
- 4-8-2 Maintain groups (GROUP SETUP)
- 4-8-3 Response to individual calls (INDIV REPLY)
- 4-8-4 Enable DSC functionality (DSC SELECT)
- 4-8-5 Response type to LL polling calls (LL REPLY)
- 4-8-6 Automatic Channel switching (AUTO SWITCH)
- 4-8-7 DSC Test Reply (TEST REPLY)
- 4-8-8 Set the inactivity timer (TIMEOUT)
- 4-9 ATIS SETUP (EU only)
- 4-10 Get Buddy
- 4-11 Track log
- 4-12 Erase track
- 4-13 Reset (Reset to factory defaults)
- Section 5 - Sending and Receiving DSC Calls
- 5-1 What is DSC?
- 5-2 DSC call types
- 5-3 Send an Individual call (INDIVIDUAL)
- 5-4 Reply to the Last Call (LAST CALL)
- 5-5 Send a Group call (GROUP)
- 5-6 Send an All Ships call (ALL SHIPS)
- 5-7 Reply to a call in your Call Log (CALL LOG)
- 5-8 Reply to a call in your Distress Log (DISTRESS LOG)
- 5-9 Request the LL position of a buddy (LL REQUEST)
- 5-10 Track your buddy request (TRACK BUDDY)
- 5-11 Make a DSC test call (DSC TEST)
- 5-12 View User MMSI and GPS information
- 5-14 Receiving DSC Calls
- 5-15 Receiving an All Ships Call (ALL SHIPS)
- 5-16 Receiving an Individual Call (INDIV)
- 5-17 Receiving a Group Call (GROUP)
- 5-18 Receiving a Geographic Area Call (GEOGRAPH)
- 5-19 Receiving a Polled Position Call (POSITION)
- Section 6 - Distress calls
- Section 7 - Installation Instructions
- Appendix A - Technical specifications
- Appendix B - Frequency charts
- Appendix C - EU inland waterway channels
Lowrance - Link-2 Installation and Operation Instructions 23Lowrance - Link-2 Installation and Operation Instructions22
SAVE
MOOR 1
►YES
NO
1. Hold down CALL/MENU for 3 seconds (US ONLY); or press MENU key (EU only).
2. The cursor is at WAYPOINT, press ENTER.
3. Select WP LIST, and then NEW WP.
4. Use the CH / to enter the new waypoint name, one alphanumeric character at
a time. Select one waypoint symbol (there are 20 icons available); and then press
ENTER until the cursor moves to the latitude line.
5. Use the CH / to enter the latitude of the waypoint, one number at a time; then
press ENTER. The cursor moves to the longitude.
6. Use the CH / to enter the longitude waypoint, one number at a time, then press
ENTER.
7. A new screen appears automatically to show the new waypoint details. If they are
correct, press ENTER to STORE the new waypoint. (If they are not correct, select
EXIT).
4-1-2 Edit a waypoint
WP EDIT
FISH 2
12°32.233’N
132°45.651’W
MENU SELECT
►WAYPOINT
BACKLIGHT
LAMP
WAYPOINT
►WP LIST
WP LIST
NEW WP
FISH 1
►FISH 2
WP EDIT
MOOR 1
12°32.233’N
132°45.651’W
SAVE
MOOR1
►YES
NO
1. Hold down CALL/MENU (US only); or press MENU (EU only).
2. The cursor is at WAYPOINT. Press ENTER.
3. Select WP LIST, then push ENTER, the cursor is at new WP. Scroll down to the
waypoint you want to edit then push ENTER.
4. Select WP EDIT and press ENTER.
5. The waypoint details are displayed and the cursor is positioned at the rst character
of the name.
6. Use the CH / to change the rst character of the waypoint name then press
ENTER, or just press ENTER to skip to the next character.
When you reach the last character of the waypoint name, make any changes if nec-
essary, then press ENTER to move the cursor to the waypoint icon.
Note: If you do not want to change the waypoint name waypoint icon, press ENTER
repeatedly until the cursor moves to the latitude.
To change the waypoint icon, use the CH / to change the icon or press ENTER to skip
to latitude. To change latitude, use the CH / to change the rst digit or press ENTER to
skip to the next digit. Repeat if necessary. When you reach the last digit, push ENTER to
move the cursor to longitude.
Note: If you do not want to change the latitude, press ENTER repeatedly until the cursor
moves to the longitude.
1. Repeat the previous step to change or press ENTER to continue.
2. A new screen appears. Press ENTER if you want to STORE the new waypoint. If you
want to keep the original entry, move the cursor to NO then press ENTER.
4-1-3 Delete a waypoint
FISH 2
GO
WP EDIT
►DELETE
MENU SELECT
►WAYPOINT
BACKLIGHT
LAMP
WAYPOINT
►WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP
FISH 1
►FISH 2
DELETE
FISH 2
►YES
NO
WP LIST
NEW WP
FISH 1
►HOME
Hold down CALL/MENU for about 3 seconds (US only); or press MENU (EU only).
1. The cursor is at WAYPOINT, press ENTER.
2. Select WP list and press ENTER. The cursor is at new WP, scroll down to the waypoint
you want to delete, then press ENTER.
3. The cursor is at GO. Move the cursor to delete and push ENTER.
4. The waypoint is deleted immediately and the revised waypoint list is displayed.