User's Manual
Table Of Contents
- Chapter 1 - General Information
- Chapter 2 - The Radio Menu (MENU)
- Chapter 3 - Radio Setup Menu (RADIO SETUP)
- Chapter 4 - DSC Setup Menu (DSC SETUP)
- Chapter 5 - Sending and Receiving DSC Calls
- 5.1 WHAT IS DSC?
- 5.2 Sending dsc calls
- 5.2.1 Make a Routine Call MANUALLY (INDIV REPLY)
- 5.2.2 Retrying a Routine Call
- 5.2.3 ACKNOWLEDGE AN INDIVIDUAL CALL (INDIV ACK)
- 5.2.4 Recall the Most Recent INCOMING Call (LAST)
- 5.2.5 Call a Group (GROUP)
- 5.2.6 Call All Ships (ALL SHIPS)
- 5.2.7 CALL Using the Call Log (CALL LOG)
- 5.2.8 CALL using the distress log (DISTRES LOG)
- 5.3 receiving dsc calls
- Chapter 6 - Distress Calls
- Appendix A - Technical Specifications
- Appendix B - Troubleshooting
- Appendix C - VHF Marine Channel Charts
- Appendix D - MMSID & License Information
6
1.3 HOW TO DISPLAY AND NAVIGATE MENUS
1. Hold down MENU (or CALL MENU). Note that only four menu items can be
displayed at any one time on the LCD.
2. Press + CH - to scroll up and down the menu until the cursor is postioned at
the desired option. Press ENT to display that option.
3. Make any entries or changes as explained in the following section.
4. Press ENT to confirm changes. Otherwise, press ESC to keep the original
entry.
5. Press ESC to exit from the screen. Any changes are active as soon as you
exit the screen.
1.4 HOW TO ENTER ALPHANUMERIC DATA
If your NAVMAN VHF radio does not have the optional alphanumeric
microphone, use the + CH - key to enter alphanumeric data.
Press + to count through numbers, or hold down to scroll rapidly to the desired
number.
Press - to step through the alphabet, or hold down to scroll rapidly to the
desired character.
1.5 LCD SYMBOLS AND MEANINGS
This simulation shows the locations of all the following information symbols: