User's Manual
Table Of Contents
- Chapter 1 - General Information
- Chapter 2 - The Radio Menu (MENU)
- Chapter 3 - Radio Setup Menu (RADIO SETUP)
- Chapter 4 - DSC Setup Menu (DSC SETUP)
- Chapter 5 - Sending and Receiving DSC Calls
- 5.1 WHAT IS DSC?
- 5.2 Sending dsc calls
- 5.2.1 Make a Routine Call MANUALLY (INDIV REPLY)
- 5.2.2 Retrying a Routine Call
- 5.2.3 ACKNOWLEDGE AN INDIVIDUAL CALL (INDIV ACK)
- 5.2.4 Recall the Most Recent INCOMING Call (LAST)
- 5.2.5 Call a Group (GROUP)
- 5.2.6 Call All Ships (ALL SHIPS)
- 5.2.7 CALL Using the Call Log (CALL LOG)
- 5.2.8 CALL using the distress log (DISTRES LOG)
- 5.3 receiving dsc calls
- Chapter 6 - Distress Calls
- Appendix A - Technical Specifications
- Appendix B - Troubleshooting
- Appendix C - VHF Marine Channel Charts
- Appendix D - MMSID & License Information
29
1. If there is no reply to your call after one minute (UNABLE TO ACKNOWLEDGE)
the VHF 7100 asks if you want to retry the call (SEND AGAIN?).
2. Select YES and press ENT to retry the call.
The VHF 7100 will repeat this cycle twice. If the call still cannot be placed,
the VHF 7100 returns to normal operation.
5.2.3 ACKNOWLEDGE AN INDIVIDUAL CALL (INDIV ACK)
TBS. OR is this VHF 7200 specific?
5.2.4 RECALL THE MOST RECENT INCOMING CALL (LAST)
The VHF 7100 stores the contact details of your most recent incoming call, so
that you can call up quickly, if necessary.
1. Press CALL MENU to enter DSC mode, then select LAST CALL.
The VHF 7100 displays the contact details of the most recent incoming
call.
2. Press ENT to send a call to that contact, then set the channel and continue
as explained in Section 5.2.1.
5.2.5 CALL A GROUP (GROUP)
1. Press CALL MENU to enter DSC mode, then select GROUP CALL. The VHF
7100 displays the names of your groups.
2. Select the group that you want to call, then set the channel and continue as
explained in Section 5.2.1.