User's Manual
Table Of Contents
- Chapter 1 - General Information
- Chapter 2 - The Radio Menu (MENU)
- Chapter 3 - Radio Setup Menu (RADIO SETUP)
- Chapter 4 - DSC Setup Menu (DSC SETUP)
- Chapter 5 - Sending and Receiving DSC Calls
- 5.1 WHAT IS DSC?
- 5.2 Sending dsc calls
- 5.2.1 Make a Routine Call MANUALLY (INDIV REPLY)
- 5.2.2 Retrying a Routine Call
- 5.2.3 ACKNOWLEDGE AN INDIVIDUAL CALL (INDIV ACK)
- 5.2.4 Recall the Most Recent INCOMING Call (LAST)
- 5.2.5 Call a Group (GROUP)
- 5.2.6 Call All Ships (ALL SHIPS)
- 5.2.7 CALL Using the Call Log (CALL LOG)
- 5.2.8 CALL using the distress log (DISTRES LOG)
- 5.3 receiving dsc calls
- Chapter 6 - Distress Calls
- Appendix A - Technical Specifications
- Appendix B - Troubleshooting
- Appendix C - VHF Marine Channel Charts
- Appendix D - MMSID & License Information
23
Chapter 4 - DSC Setup Menu (DSC SETUP)
These DSC facilities are available only on the VHF7100
USA and VHF7100 EC models, and a valid user MMSID
must be entered to access the DSC functions.
4.1 DSC SETUP - MENU OPTIONS
The following options are available:
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save
and change data.
4.2 ENTER YOUR USER MMSID (USER MMSID)
This is a once-only operation. You must enter your user MMSID before you can
access the DSC functions, as follows:
Enter your user MMSID. If you do not have a user MMSID,
see Appendix E.) See section 4.2.
USER MMSID
GROUP SETUP
INDIV REPLY
ATIS MMSID
ATIS FUNC
DSC FUNC
LL REPLY
Enter or change the name and/or details of a group.
See section 4.3.
Enter or change your ATIS MMSID (7100 EC only).
See section 4.5.
Enable/disable the ATIS function (7100 EC only).
See section 4.5.
Select the type of response to an LL request.
See section 4.7.
Turn DSC scanning on/off.
See section 4.6.
Choose an automatic or manual response to calls.
See section 4.4.