User's Manual
Table Of Contents
- Chapter 1 - General Information
- Chapter 2 - The Radio Menu (MENU)
- Chapter 3 - Radio Setup Menu (RADIO SETUP)
- Chapter 4 - DSC Setup Menu (DSC SETUP)
- Chapter 5 - Sending and Receiving DSC Calls
- 5.1 WHAT IS DSC?
- 5.2 Sending dsc calls
- 5.2.1 Make a Routine Call MANUALLY (INDIV REPLY)
- 5.2.2 Retrying a Routine Call
- 5.2.3 ACKNOWLEDGE AN INDIVIDUAL CALL (INDIV ACK)
- 5.2.4 Recall the Most Recent INCOMING Call (LAST)
- 5.2.5 Call a Group (GROUP)
- 5.2.6 Call All Ships (ALL SHIPS)
- 5.2.7 CALL Using the Call Log (CALL LOG)
- 5.2.8 CALL using the distress log (DISTRES LOG)
- 5.3 receiving dsc calls
- Chapter 6 - Distress Calls
- Appendix A - Technical Specifications
- Appendix B - Troubleshooting
- Appendix C - VHF Marine Channel Charts
- Appendix D - MMSID & License Information
11
Chapter 2 - The Radio Menu (MENU)
2.1 RADIO MENU OPTIONS (MENU)
The following options are available through MENU (or CALL MENU):
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save
and change data.
BUDDY LIST
LOCAL/DIST
BACKLIGHT
CONTRAST
GPS/DATA
DSC SETUP
RADIO SETUP
GPS SIMULATOR
GPS SIMULATOR
GPS SIMULATOR
RESET
CH NAME
RING VOLUME
INTERNAL SPK
WATCH MODE
WX ALERT
COM PORT
USER MMSID
GROUP SETUP
INDIV REPLY
ATIS MMSID
ATIS FUNC
DSC FUNC
LL REPLY
MANUAL
SETTING
Maintain your buddy list.
See Section 2.2.
Set radio sensitivity.
See Section 2.3.
Set backlight level.
See Section 2.4.
Set contrast level.
See Section 2.4.
Set position & UTC manually.
See Section 2.5.
Set local time and time format.
See Section 2.5.
DSC Setup Menu.
7100 USA and EC models only.
See Chapter 4.
Radio Setup Menu.
See Chapter 3.
Turn the GPS Simulator on/off.
See Section 2.6.
Reset factory settings.
See Section 2.7.
Make DSC calls.
7100 USA and EC models only.
See Chapter 5.