User's Manual

31
5 DSC Setup Menu (DSC SETUP)
Warning. A valid USER MMSI must be entered into the radio before these DSC functions can be used.
See Section 5.1 for instructions on entering your USER MMSI.
Hold down CALL MENU for about 3 seconds to access any of the following DSC SETUP options.
Menu options shown inside the gray box are explained in this chapter.
WAYPOINT Section 3.1
BACKLIGHT Section 3.2
BUDDY LIST Section 3.3
LOCAL/DIST Section 3.4
CONTRAST Section 3.6
GPS/DATA MANUAL Section 3.6.1
SETTING TIME OFFSET Section 3.6.2
TIME FORMAT Section 3.6.3
TIME DISPLY Section 3.6.4
LL DISPLY Section 3.6.5
COG/SOG Section 3.6.6
GPS ALERT Section 3.6.6
RADIO SETUP UIC LVR-880US only
Section 4.1
CH NAME
Section 4.2
RING VOLUME
Section 4.3
KEY BEEP
Section 4.4
UNITS
Section 4.5
INT SPEAKER
Section 4.6
WATCH MODE LVR-880US only
Section 4.7
WX ALERT LVR-880US only TONE ALERT
Section 4.8.1
SAME ALERT
Section 4.8.2
SAME CODE
Section 4.8.3
COM PORT
Section 4.9
GPS SOURCE
Section 4.10
FM REGION
Section 4.11
DSC SETUP USER MMSI
Section 5.1
GROUP SETUP
Section 5.2
ATIS MMSI LVR-880EU only
Section 5.3
ATIS SELECT LVR-880EU only
Section 5.4
DSC SELECT
Section 5.5
LL REPLY
Section 5.6
GPS SIM
Section 3.7
RESET
Section 3.8
See sections 1.5 and 1.6 if you want to know how to move around the menu and enter, save and
change data.