Installation Manual

6
Simrad - RS35 & HS35 Installation Instructions
1 Installation preparation
1.1 C hec kli s t
Check that you have all the following items before starting the installation. Contact your
dealer if an item is missing:
• RS35 base station, with microphone
attached
• Dust cover
• GPS connector cable
• Speaker connector cable
• Power supply cable
(with 7 A fuseholder incorporated)
• Spare 7 A fuse
• Mounting bracket, with:
- 4 self-tapping scr ews
- 4 flat scr ews
- 4 plain washers
- 4 spring washers
- 4 nuts
- 2 mounting knobs
• Handset mic wall hanger , with:
-
2 self-tapping scr ews
-
2 flat scr ews
-
2 plain washers
-
2 spring washers
- 2 nuts
• 2 M5 x 32 screws with 2 plain washers
and 2 nuts (for a recessed installation)
• Operation Manual
• Installation Manual
• Warranty C ar d
• DSC Warning Label
• Template for flush mounting option
• Declaration of Conformity document
(where applicable)
Note: A VHF antenna is not provided by Simrad . Consult your Simrad dealer for advice if
necessar y .
1.2 Tools needed for installation
You will need the following tools:
• Power drill (or hand drill) and drill bits
• Philips scr e w dr iv er
• Spanner
• Jig saw (for a recessed installation).