Installation Manual

Simrad - RS35 & HS35 Installation Instructions
13
Pin / S o ck et Wire c olor Function (NMEA 2000)
1 Gr een C an-D , Drain wir e , Shield
2 R ed Can-S, P o w er , +12 V DC
3 Black Can-C, Gr ound
4 White Can-H, Data High
5 Blue Can-L, Data L o w
3 - GPS Connector and c able
NMEA0183 OUT (+)
2 ( Or ange)
NMEA0183 IN (+)
5 ( Y ello w)
NMEA0183 IN (-)
4 (Gr een)
RS422 OUT (-)
3 ( W hit e)
RS232 OUT
7 (Blue)
GROUND (Shield)
NMEA0183 OUT
(-)
1 (Bare wir e)
RS422 OUT (+)
6 (Black)
RS232 IN
8 ( Grey)
Line up the arrow on the GPS connector with the arrow on the GPS cable and plug t ogether .
The pin details are shown for information.
Pin /
S o ck et
Wire
c olor
GPS / MFD
(NMEA 0183)
AIS
(NMEA 0183 HS)
1 Shield
GROUND,
NMEA 0183 OUT (-)
4800bps RS232 OUT (-) 38.4 kbps
2 Orange NMEA 0183 OUT (+) 4800bps
3
White
RS422 OUT (-)
38.4 kbps
4
Green
NMEA 0183 IN (-)
4800bps
5 Yellow NMEA 0183 IN (+) 4800bps
6 Black RS422 OUT (+) 38.4 kbps
7 Blue RS232 OUT (+) 38.4 kbps
8
Grey
RS232 IN
Not used
Note: The GPS connector on the radio is provided with a protective cov er . If this connector
will not
be used , please ensure the protective cover is fitt ed .