User's Manual

Instructions for First Use
1. Insert the Receiver
2. Switch on the Power
3. Establish Bluetooth Link
Note about Bluetooth Connection
When you power on the B20, you must wait five seconds for Bluetooth to self-test before
a connection is established. Wait until the Bluetooth light begins to flash (once every
second). A Bluetooth link can now be established between a PDA and the B20.
To link the receiver with a PDA (Personal Digital
Assistant), follow these steps:
•
Activate the Bluetooth Manager, select
Search and then link.
•
Select the “NAVMAN GPS “icon and choose
SPP slave to establish the Bluetooth link.
• Refer to the “Software Installation” section in
the user manual for further details if you have
any problems establishing the link.
• Slide the power switch to the ON
position.
• Insert the GPS Receiver into your
car’s lighter slot.