Installation Manual

S t e p 6
Setting the Tilt Angle Position
6
6 . 1
6 . 2
6 . 3
i
S t e p 7
Adjusting the Torque of Gas Spring
Adjust the torque of gas spring according to the weight of your monitor. If your monitor
can not stay in the lower position, turn the grub screw clockwise(-). If your monitor can
not stay in the higher position, turn the grub screw counterclockwise(+). Keep turning
until monitor position can be raised and lowered easily.
+
-
i
www.NavePoint.com
[e-mail]