Installation Manual
www.NavePoint.com 4 customerservice@navepoint.com
The top and bottom panels of the enclosure both have circular cable access ports for convenient cable
management. The tops of all models have three 1.75” ports and two 1” ports. The bottoms of 2U series models
have two 1” and 1.75” ports, while the 5U series models have three 1” ports and two 1.75” ports.
-Reversing the Front Door
In order to accommodate various rack installations, the front door can be reversed by switching the configuration of
the latch, lock and hinges. To reverse the door, simply remove the screws that secure the latch, lock and hinges to the
enclosure. Move each piece to the opposite side of the enclosure, so that there are two hinges on one side (one at
the top, one at the bottom) and install the latch and the lock on the other side.
Note: The unused screw holes are filled with rubber placeholders. To remove the placeholders, push them through
with a screwdriver. Keep the placeholders to refill unused screw holes.