Installation Manual

www.NavePoint.com 4 customerservice@navepoint.com
WARNING: Two people should remove the
enclosure from the pallet. Be extremely careful
when moving the enclosure. Position at least one
person at the front of the enclosure and one person
at the rear of the enclosure. Slowly push (or lift) the
enclosure off the side of the shipping pallet.
Use the casters to move the enclosure for a short
distance over a level, smooth, stable surface by
pushing it from the front or rear of the enclosure. Do
not attempt to roll the enclosure over long distances.
The enclosure should be moved close to its
installation location inside its shipping container
before it is unpacked. (Use a forklift or pallet jack to
move the shipping container.) WARNING: Do not pull
the enclosure toward you as it may result in injury.
-Leveling
Level the enclosure before attempting to install any equipment into the enclosure. The casters are not
designed to provide long-term support for the enclosure. Use the levelers to provide long-term support.
Install the enclosure in a structurally sound area with a level floor that can bear the weight of the
enclosure, all equipment that will be installed in the enclosure and any other enclosures and/or
equipment that will be installed nearby