Installation Manual
www.NavePoint.com 7 customerservice@navepoint.com
After the mounting plate has been
secured and the enclosure hung
properly, secure the enclosure to the
mounting plate by installing the three
supplied screws in the holes on the
mounting hooks as shown.
Caution: Make sure that the enclosures
contents do not exceed the maximum
weight capacity of the enclosure.
4. Equipment Installation
1 Rack Unit
Note: The unit comes with two different kinds of screws for equipment installation, black and silver. Use the black
mounting screws if you are securing your equipment to the square hole side of the mounting rail. Use the silver screws
if you are securing your equipment to the tapped hole side of the mounting rail.