Installation Manual
www.NavePoint.com 6 customerservice@navepoint.com
3. Mounting the Enclosure to the Wall
Attach the mounting plate to
a wall or other suitable
mounting surface. Each
mounting hole can
accommodate an M6 bolt
and the holes are spaced 16"
apart to accommodate
standard stud placement as
reflected in the diagram.
Note: When mounting the
mounting plate to the wall,
be sure the three mounting
hooks are facing outwards
and away from the wall.
After the mounting plate has
been securely attached to the
mounting surface, hang the
enclosure’s three mounting
notches onto the three
mounting hooks on the plate
attached to the wall. The
notches will fit over the
hooks and the enclosure
should slide down onto the
hooks until secure.