Installation Manual

www.NavePoint.com 3 [e-mail]
Warning: Do not attempt to mount to wall, when equipment is mounted inside rack. Rack can hold up to 150 pounds
evenly distributed. Make sure wall surface can hold weight of rack/equipment.
Both the top and bottom “A”
Wall mount Frames have 3
mounting holes and 3
locking pin holes to
accommodate 3 different
mounting depth positions.
Choose a position according
to your required
configuration.
Use a 17mm Wrench (not
included) to attach the
Equipment Mounting Frame
to one of the “A” Wall
Mount Frame first, using the
T bolt, washer, pivot bearing
and locknut as shown in the
diagram.