English www.NavePoint.com customerservice@navepoint.
www.NavePoint.com customerservice@navepoint.com ©2017 NavePoint,LLC Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or use of your product, please call us at 888.505.1363. Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not attempt to install or use product if it has been damaged. During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Supplied Parts List (1) 48mm Tube Support-a (1) Disconnected “C” Clamp-b (1) VESA Plate with Arm Assembled-c (1)Wrench-l (12)M4x12 Thumb Bolt-d (12)M4x30 Bolt-e (24)M4 Washer-f (12)M4 Space-g (2)M8x10 Bolt-h (2)M10x15 Bolt-i (1)Allen Key-j (2)Spare Plastic Cover-k Tools Required Phillips Screwdriver CAUTION! WARNING www.NavePoint.com This monitor desktop mount must be securely attached to the horizontal desk.
Step 1 Install the “C” Clamp According to the Desktop Thickness The depth of “C” clamp can be changed in three positions. Choose the proper depth according to the thickness of your desktop. Connect it to tube support (a) with 2pcs M10x15 bolts (i), using the supplied Allen Key (j). Tighten or loosen the tension knobs (b) to ensure a tight connection to desk.
Step 3 Mount the Monitors to the VESA Plates g f f e d For monitor with flat back Step 4 For monitor with curved back Manage the Wires and Adjust the Turning Tension j Manage the wires using the wire clips. Some wires can be hidden inside the pipe. Step 5 Remove the plastic covers and use the Allen Key (j) to adjust the turning tension.