Owner's Manual

ManualsBrandsNavAtlas ManualsATV & UTVNS35A

INSTALLATION/OWNER'S MANUAL

NS14A/NS27A/NS35A

Summary of content (10 pages)

PAGE 1
NS14A/NS27A/NS35A INSTALLATION/OWNER'S MANUAL
PAGE 2
NS14A/NS27A/NS35A INSTALLATION Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring. • If additional wiring is required, we recommend that you run all wires prior to mounting your speaker in place.
PAGE 3
NS14A/NS27A/NS35A INSTALLATION Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring. • If additional wiring is required, we recommend that you run all wires prior to mounting your speaker in place.
PAGE 4
NS14A/NS27A/NS35A INSTALLATION Preparation/Installation When mounting the sound bar using the adjustable mount, please be sure to use the appropriate size clamp for your bar size. Please use only the supplied screws to fasten clamp WARNING : When inserting screws please hand tighten first before fastening and make sure the screw is straight and not at an angle, this will damage the screw thread of the mount.
PAGE 5
NS14A/NS27A/NS35A INSTALLATION Connection Descriptions NOTE: Be sure to follow specific instructions included with your product. The information below should be used as a general guide only. RED Power wire (12V+) • Disconnect negative battery terminal before proceeding. Consult a qualified technician for instructions if you are unsure. • Plan wire routing before cutting any wires to length. Use a grommet when running wires through the firewall or metal openings.
PAGE 6
NS14A/NS27A/NS35A INSTALLATION POWER LED OUTPUT "DAISY CHAIN" SIGNAL INPUT POWER EXAMPLE OF DAISY CHAIN DIGITAL CONFIGURATIONS FOR ANY VEHICLE D2D CABLE 12V(+) *OPTIONAL ACCESSORIES ARE D2Y AND D2D CABLES (SOLD SEPARATELY) NS14A/27A/35A 2 pin waterproof DIN connector 10 Feet (10GA) 10 Feet (18GA) for soundbar 8 pin waterproof DIN connector 8 pin waterproof DIN connector 12V(+) Ground(-) 10 Feet (12GA) A2A CABLE CONNECTING CABLE 4 pin waterproof DIN connector D2D CABLE Y ADAPTER CABLE Gro
PAGE 7
NS14A/NS27A/NS35A INSTALLATION DAISY CHAIN SETUP USING ANALOG SIGNAL NS14A/27A/35A Ground(-) DXP1000 / DXU1100 / AFTERMARKET RADIO 12V(+) WHEN USING ANALOG RCA FROM A RADIO, THE A2A CABLE(SOLD SEPARATELY) IS REQUIRED FOR DAISY CHAIN FUNCTION TO WORK.
PAGE 8
NS14A/NS27A/NS35A INSTALLATION Limited One Year Warranty EXCHANGE ONLY ON FACTORY DEFECTS, PHYSICAL DAMAGE IS NOT COVERED BY WARRANTY.
PAGE 9
NS14A/NS27A/NS35A INSTALLATION Specifications NS14A/NS27A/NS35A size 14" 27" 35" type Aluminum Aluminum Aluminum 3.5" 2pcs 3.5" 6pcs 3.5" 8pcs 0.75" 0.75" 0.75" Aluminum Aluminum Aluminum Rubber surround Rubber surround Rubber surround Aluminum Aluminum Aluminum EVA EVA EVA Tweeter 0.5" 2pcs 0.5” 4pcs 0.