Owner's Manual

NavRtlasT .. NA1er
2
CO NTR OL LER MOUNTIN G
ROLLBAR I CAGE MOUNT
1.5" 1.75" 2.00"
FLUSH MOUNT
1) Always check mounting depth before cutting
2) Use the flush bezel as template
3) Cutout hole exactly
4) Insert flush mount bezel, push side tabs outwards
5) Use optional silicon glue to give extra hold
6) Insert CONTROLLER
SURFACE MOUNT
TOOLS NEEDED:
- Crimp Tool
- Wrench or Pliers
- 4mm Allen Wrench
1) Check mounting depth before drilling
2) Use the flush bezel as template
3) Drill or cut wire hole exactly
4) Insert rubber bim around flush bezel,
screw in place
5) Insert CONTROLLER
~ OPTIONAL TOOLS NEEDED:
~ • Hand saw or Jigsaw