Owner's Manual

INSTALLATION
-
-~--~--~~--~~
Bluetooth
Operation
(BMA476BTI
Pairing a
Device
Preparation
l
Before you can use a Bluetooth device. it must
be
paired
i and connected. Make sure that Bluetooth is activated
on
1
your device before you begin the pairing process.
Pairing a
New
Device The BMA476BT broadcasts the pairing signal constantly
when
no
devices are currently connected. Complete the
pairing sequence from your Bluetooth device.
The
device
name
is
··NA300BT"
Streaming Audio
Operation
The BMA4768T supports A2DP (advanced audio distribution profile) wireless
streaming audio from your Bluetooth mobile device directly.
When paired. you can also control your music from your Bluetooth mobile
device.
Note before you use Bluetooth:
1.
Once
your device has been paired to the BMA476BT. it
will
automatically
connect when the device is in range. there
will
not
be
a need
to
manually
connect once the amplifier is powered off and on.
2.
When your device and the BMA476BT are connected. the amplifier
will
automatically switch from Line-in
(RCA)
to
BT
streaming once a music app is
started (Music player. Internet radio.
ECT
...
)
3.
When
an
incoming phone call is received. the music
will
pause and resume
once the call has ended. incoming calls
will
not
be
transmitted to the
amplifier
(Hands-free mode is not supported. only A2DP streaming)
4.
To
switch back to Line-in
(RCA)
on
the amplifier.
all
music apps
on
your
device must
be
stopped and terminated.
10