NAVAL Inc. Rab Exert F +1201.939.3889 www.NavacGlobal.
po = Making Your Job More Enjoyable CONTENTS SAFETY GUIDE NAME DF PARTS ACCESSORIES SPECIFICATION Dear User: Thank you for choosing NAVAL product. Please read this operating manual carefully before use it. We suggest you keep this manual with the product or in the place where you can easily find for later reference. Work area safety 1.1 Keep work area clean and well lit. Cluttered or dark areas Invite accidents. 1.
po = Making Your Job More Enjoyable 4. Power tool use and care 4.1 Disconnect the plug from the power source candor the battery pack from the power tonal before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 4.2 Tors idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these Instructions to operate the power tool.
KANE oF Parr CE No. Name oii wea Quantity No. Name 1 | tn cite a rotatory) 66.3 1 1 Expanded body 2 Backup Battery 162 1 2 Switch 3 Charger 34x3.1%1 37 1 3 Battery 4 | ExpanderBody(inch) | 32x33x18 8.1 4 4 Caner ties 5 Liner 09 [ 5 Housing 6 Tubs Cutter 12 1 7 Tube Debarring Tool 0.8x5.8 Carrying case 683 1 9 Operating Manual 1 Total 209 Please check the parts after unpacking to see if any parts missed or damaged EE 1.
Making Your Job More Enjoyable FV, = 2, Battery Battery type Li-ion Voltage 108V Capacity 2.6Ah Charging Time Approximately 3 hours (May vary depending on usage) Battery Recharge Times Up to 500 times (May vary depending on usage) Charging Temperature -4~140°F 3. Charger Applicable Battery Trillion 10.8 V Power Supply AC100~240V {50/60Hz) Charging Mode Litigant Control Charging Voltage 12.6V Charging Current 1A Charging Temperature 4~140'F 08 Making Your Job Mrs Enjoyable py. =. OPERATING INSTRUCTIONS 1.
Making Your Job More Enjoyable 2. Setting up the tool 2.1 Clamping the tube 2.1.1 Choose an expanded body that is compatible with the tube size, and then place the tube to make sure that the tube end and baffle at the same level {Fig-7) 2.1.2 Ensure the tube is placed property and locked. (Fig.8)} 2.2 Fasten the expanded body Slide the expanded body ( in which the tube has been placed) to the main unit. Rotate the expanded body until it fastened and the baffle shows.
po = Making Your Job More Enjoyable If an abnormality occurs with the product, please check the following troubleshooting form. If cannot solve, please contact the manufacturer or the sales distributor from whom you purchased the product. Caution: Do not rappel or disassemble It by yourself. (Any self-repair or disassemble will be regarded as voluntary renunciation of warranty.) Making Your Job Mrs Enjoyable TROUBLESHOOTING py. =.
Making Your Job More Enjoyable FV, = ENVIRONMENTAL PROTECTION CAUTION Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or stockist for advice on recycling. Making Your Job Mrs Enjoyable py. =.
