Operation Manual

8
• Tap
to open the Traffic Summary screen.
• Tap
to stop navigation and exit the software.
2.2 Buttons and other controls on the screen
When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, the software saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type Example Description How to use it
Button
Tap it to initiate a
function, to open a new
screen, or to set a
parameter.
Tap it once.
Button
with value
Some buttons display
the current value of a
field or setting. Tap the
button to change the
value. After the change,
the new value is shown
on the button.
Tap it once.
Icon
Shows status
information.
Some icons also
function as a button.
Tap them once.
List
When you need to
select from several
options, they appear in
a list.
Grab the list anywhere
and slide your finger up
or down. Depending on
the speed of the
sliding, the list will
scroll fast or slow, only
a bit or till the end.
Alternatively, move
between pages with
the
and
buttons and tap the
value that you want.
Radio
button
When there are only a
few choices, radio
buttons may be used
instead of lists. Only
one value can be
selected.
Tap one of the buttons
to select a new value.