Operation Manual

84
4.5.7 GPS settings
You can set up the connection to the GPS receiver. Tap the following buttons: , ,
.
Button Description
GPS receiver ...
The first line of the screen informs you about the connection status of the
GPS receiver.
Connecting the GPS receiver is automatic in IGO 8, so normally you will not
need this screen of settings at all.
GPS Enabled
Turn the connection to the GPS receiver on or off. Turning off the GPS
receiver can be useful for indoors use or demonstration purposes.
Port
The communication port used between the GPS receiver and the application.
Baud Rate The communication speed used between the GPS receiver and the
application.
Autodetect Tap this button and let IGO 8 find and connect to the GPS receiver.
4.5.8 TMC settings
You can set up the connection to the TMC receiver. If the TMC receiver is working, you can select the
radio station to be received. Tap the following buttons:
, , .
If there is no TMC receiver connected to IGO 8, you have the following options:
Button Description
No TMC Hardware
Found!
The first line of the screen informs you about the connection status of the
GPS receiver.
Connecting the TMC receiver is automatic in IGO 8, so normally you will not
need this screen of settings at all.
Protocol
The communication protocol used between the TMC receiver and the
application.
Port
The communication port used between the TMC receiver and the application.
Baud Rate The communication speed used between the TMC receiver and the
application.
Autodetect Tap this button and let IGO 8 find and connect to the TMC receiver.